Engine Speed/Timing Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (1).
- Remove engine speed/timing sensors (2) from the flywheel housing. Remove the O-ring seal from the engine speed/timing sensors.
Show/hide table
| |
| Illustration 1 | g03406770 |
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 5P-3931 | Anti-Seize Compound | - |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine speed/timing sensors in the reverse order of removal.
- Install the O-ring seal on engine speed/timing sensor (2). Extend sliphead (3) to a minimum distance of 4.0 mm (0.16 inch) prior to installation.
- Apply Tooling (A) to the threads of engine speed/timing sensors (2). Install the engine speed/timing sensors in the flywheel housing and tighten to a torque of
40 ± 5 N·m (30 ± 4 lb ft) .
Caterpillar Information System:
Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C} Installation of the 384-9286 Protection Cover Gp for Certain Clean Emissions Module Arrangements{108D, 795C}
3512E Engines for Well Stimulation Pumps Cover Group (Front Housing)
3516C Petroleum Engines Flywheel
C15 Petroleum Generator Set Engines Belt Tightener
3516C Petroleum Engines Flywheel Housing Cover
C7.1 Industrial Engine Diesel Exhaust Fluid Tank - Flush
C7.1 Industrial Engine Fuel and the Effect from Cold Weather
C7.1 Industrial Engine Aftertreatment SCR System Dosing - Test
3516C Marine Engines Thermostatic Valve
C3.4B Engines for Caterpillar Built Machines Diesel Exhaust Fluid Quality - Test
3516C Petroleum Engines Water Lines
3500B Marine Propulsion Engines Maintenance Interval Schedule
435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000} 435-8503 Major Engine Overhaul Foundational Kit for 3406E Marine Engines{1000}
3512C Oil Well Service Engines Declaration of Conformity
3512E HD Petroleum Engine Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3516C Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
C7.1 Industrial Engine Solenoid Valve (DEF Heater Coolant) - Remove and Install
C7.1 Industrial Engine Manifold (DEF Heater) - Remove and Install
2013/10/17 A New Expansion Tank Assembly Is Used on Certain 3500 Marine Engines {1354}
2014/01/17 Special Instructions Are Available for Retrofitting the Dynamic Gas Blending Kits on Certain 3512B Engines {1250, 1280}
3512C Petroleum Engines Electronic Control Module (Engine) - Remove and Install
C13 Industrial Engine Injector (Diesel Exhaust Fluid) - Replace
C15 and C18 Engines for Caterpillar Built Machines Fuel Filter and Water Separator
C7.1 Industrial Engine Diesel Exhaust Fluid Module - Disassemble