1992/06/01 Caterpillar


New Carrier Assembly Used In Governor And Fuel Pump Drive Groups

Usage:


3406B (2EK) PEEC Truck Engines 3406B (4CK1-845) PEEC III Truck Engines 3406C (4CK846-Up) Electronic Truck Engines

SUPPLEMENT: 09/00/92

Truck Engine News, July 1992, Page 2, "New Carrier Assembly Used In Governor And Fuel Pump Drive Groups," on 3406B (2EK) PEEC Truck Engines, 3406B (4CK1-845) PEEC III Truck Engines, and 3406C (4CK846-Up) Electronic Truck Engines. The part number of the carrier assembly, in the last sentence of the article, is NOT correct. The correct part number is the 1011944 Carrier Assembly.

--------------- END SUPPLEMENT ---------------

Description of Change: A new carrier assembly is used in the governor and fuel pump drive groups. The former carrier had a pressed in plug that could loosen and move. The new carrier assembly has a threaded plug.


Location of the threaded plug in the new 1011944 Carrier Assembly.

Adaptable To: The new 1011944 Carrier Assembly is a direct replacement for the former 4P2642 Carrier Assembly which is canceled. The new carrier assembly is in effect with 3406C Electronic Truck Engine 4CK4699. The new 4P2642 Carrier Assembly is adaptable to all earlier 4CK Truck Engines and all 2EK Truck Engines.

Caterpillar Information System:

1992/06/01 Correction For Camshaft And Valve Seat Specifications
1992/06/01 New Diaphragm Used In Fuel Ratio Control Groups
1992/06/01 New Cylinder Heads Have Additional Coolant Passages
1992/06/01 New Training Material On 3306C And 3406C Truck Engines Available
1992/06/01 Centrifugal Lube Filter Group Available
1992/06/01 4P6493 Governor Information Plate Available
1992/05/01 Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze
1992/05/01 Bearings Available For Schwitzer Turbochargers
1992/05/01 Fuel Injector Group Rack Movement
1992/05/01 Spring Used To Hold Valve In Position In Remanufactured Fuel Transfer Pumps
1992/05/01 New Turbocharger Groups Help Prevent Surge (Popping)
1992/05/01 New Components Used In Fuel Ratio Control Groups
1992/06/01 Boxes/Cartons Containing Used Cores Should Be Immediately And Clearly Identified
1992/06/01 List of Service Publications
1992/08/01 New Electronic Unit Injector (EUI) With New Style Solenoid Used; New Unit Injector Wiring Group Used
1992/08/01 Application Changes For Electronic Unit Injector (EUI) Part Numbers
1992/08/01 Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01 New "3406B Engine Instructor Manual " Available
1992/08/01 Supplemental Coolant Additive Requirements
1992/08/01 Reusability Of Exhaust Valves In All Caterpillar Engines
1992/09/01 New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01 New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01 Governor Specifications Are Available Through The Technical Information System
1992/09/01 Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.