2013/05/28 Caterpillar


New Flywheel Housing Assemblies and Gasket Are Used on Certain Marine and Petroleum 3500 Engines {1157, 7555}

Usage:

3508B 3DM
Engine:
3508B (S/N: S2D1-UP; S2E1-UP; S2F1-UP; 3DM1-UP)
3508C (S/N: TTA1-UP; TTB1-UP)
3512 (S/N: 50Y1-UP)
3512B (S/N: S2M1-UP)
3512C (S/N: TTE1-UP; TTF1-UP; TTG1-UP; MKH1-UP; SLM1-UP; E3W1-UP)
3516B (S/N: B5G1-UP)
3516C (S/N: TTD1-UP; PAG1-UP; TTH1-UP; TTJ1-UP; JTS1-UP; E3Z1-UP)

Description of Change: The new flywheel housing assembly along with the new gasket will provide a better seal to prevent oil leaks between the housing and block.

Adaptable To:




Illustration 1g03362527

(1) 309-4550 Gasket

(2) 340-5015 Flywheel Housing




Illustration 2g03362719

(1) 309-4550 Gasket

(3) 435-7753 Flywheel Housing As


The 309-4550 Gasket replaces the use of anaerobic sealant between the flywheel housing and the cylinder block.

ReferenceRefer to Special Instructions, REHS7873 for flywheel installation and modification procedures.Table 1 lists the new and original part numbers. Table 2 lists the effective serial numbers.

Table 1
New Part Number     Original Part Number    
340-5015 Flywheel Housing     222-9921 Flywheel Housing    
435-7753 Flywheel Housing As     222-9933 Flywheel Housing As    

Table 2
Effective Serial Numbers    
3508B     S/N:3DM00502-UP
S/N:S2D00274-UP
S/N:S2E00849-UP
S/N:S2F00126-UP    
3508C     S/N:TTA00275-UP
S/N:TTB00549-UP    
3512     S/N:50Y01828-UP    
3512B     S/N:MKH00201-UP
S/N:S2M00203-UP    
3512C     S/N:E3W00328-UP
S/N:SLM00132-UP
S/N:TTE00208-UP
S/N:TTF00542-UP
S/N:TTG00290-UP    
3516B     S/N:B5G00102-UP
S/N:PAG00483-UP    
3516C     S/N:E3Z00206-UP
S/N:JTS00408-UP
S/N:TTD00403-UP
S/N:TTH00634-UP
S/N:TTJ00243-UP    

Caterpillar Information System:

C7.1 Marine Engine Generator - Remove and Install
C4.4 and C7.1 Engines CAN Data Link - Test
C7.1 Marine Engine Cylinder Head - Install
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Flywheel
C7.1 Marine Engine Cylinder Head - Remove
2013/04/04 The Starter Solenoid is Improved on Certain Machines {1453}
G3512H and G3516H Generator Set Engines Auxiliary Water Pump - Remove and Install
G3512H and G3516H Generator Set Engines Water Pump - Remove and Install
G3512H and G3516H Generator Set Engines Water Temperature Regulators - Remove and Install
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Operational Checks
XQP150 Rental Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Universal Network Interface PWA (Flywheel Cabinet)
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pan
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather
C15 and C18 Engines Engine Oil and Filter - Change
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold
2013/04/04 An Additional Spacer Is Now Used in the Crankshaft Pulley Group of Certain C7 and C9 Marine Engines {1205}
C9.3 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Cooled by Coolant
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3 Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
C9.3 Engines for Caterpillar Built Machines Water Pump - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.