G3512H and G3516H Generator Set Engines Caterpillar


Water Pump - Remove and Install

Usage:

G3512H GF4

拆卸步骤


注意

保持所有零件清洁无杂质。

杂质会造成快速磨损並縮短部件使用寿命。



注意

在检查、保养、测试、调整及维修产品时,请小心确保盛接油液。 在打开任何舱室或拆卸任何含有油液的部件前,请准备好盛接液体用的适当容器。


  1. 排空冷却液。 有关正确的排放和加注步骤,请参考操作和保养手册, "冷却液 (NGEC) - 更换"。


    图 1g01127935

  2. 断开软管组件 (1)。

  3. 将适配器 (2) 和密封垫从水泵 (3) 上断开。

  4. 从适配器 (5) 上断开管组件 (6)。

  5. 拆下螺栓 (4) 以便从水泵 (3) 上拆卸适配器 (5) 和 O 形密封圈。

  6. 拆下螺栓 (7),以便从发动机拆下防护罩组件 (8)。


    图 2g01127942

  7. 拆卸螺栓 (9) 以便从发动机上拆卸水泵 (3)。 需要用两个人从发动机上拆卸水泵 (3)。 水泵 (3) 的重量约为 34 kg (75 lb)

安装步骤

  1. 按与拆卸相反的顺序安装水泵 (3)。

Caterpillar Information System:

G3512H and G3516H Generator Set Engines Water Temperature Regulators - Remove and Install
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Operational Checks
XQP150 Rental Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Universal Network Interface PWA (Flywheel Cabinet)
Marine Engine Control Panel I Wiring Diagrams
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Front)
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Connecting Rod
C4.4 Generator Sets Control Panel
C7.1 Marine Engine Relief Valve (Fuel) - Remove and Install - Low Pressure System Relief Valve
C7.1 Marine Engine Relief Valve (Fuel) - Remove and Install - Fuel Rail Pressure Relief Valve
C4.4 Generator Sets Single Unit Operation
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100} 126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
G3512H and G3516H Generator Set Engines Auxiliary Water Pump - Remove and Install
2013/04/04 The Starter Solenoid is Improved on Certain Machines {1453}
C7.1 Marine Engine Cylinder Head - Remove
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Flywheel
C7.1 Marine Engine Cylinder Head - Install
C4.4 and C7.1 Engines CAN Data Link - Test
C7.1 Marine Engine Generator - Remove and Install
2013/05/28 New Flywheel Housing Assemblies and Gasket Are Used on Certain Marine and Petroleum 3500 Engines {1157, 7555}
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pan
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather
C15 and C18 Engines Engine Oil and Filter - Change
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.