Flywheel
Show/hide table
| |
| Illustration 1 | g03362245 |
|
(1) Flywheel
(2) Bolt | |
Note: Apply engine oil to the threads of the bolts before assembly.
Show/hide table
| Tightening torque | Flywheel bolt | 98.1 to 107 N·m 72.4 to 79.5 lb ft |
Caterpillar Information System:
C7.1 Marine Engine Cylinder Head - Remove
2013/04/04 The Starter Solenoid is Improved on Certain Machines {1453}
G3512H and G3516H Generator Set Engines Auxiliary Water Pump - Remove and Install
G3512H and G3516H Generator Set Engines Water Pump - Remove and Install
G3512H and G3516H Generator Set Engines Water Temperature Regulators - Remove and Install
303.5E2 CR, 304E2 CR, 305E2 CR and 305.5E2 CR Mini Hydraulic Excavators Machine System Operational Checks
XQP150 Rental Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
UPS1000Z, UPS1200Z, UPS500G and UPS600G Uninterruptible Power Supplies Universal Network Interface PWA (Flywheel Cabinet)
Marine Engine Control Panel I Wiring Diagrams
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Front)
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Connecting Rod
C4.4 Generator Sets Control Panel
C7.1 Marine Engine Cylinder Head - Install
C4.4 and C7.1 Engines CAN Data Link - Test
C7.1 Marine Engine Generator - Remove and Install
2013/05/28 New Flywheel Housing Assemblies and Gasket Are Used on Certain Marine and Petroleum 3500 Engines {1157, 7555}
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Pan
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Crankcase Breather
C15 and C18 Engines Engine Oil and Filter - Change
C3.3B Tier 4 Final Engines for Caterpillar Built Machines Exhaust Manifold
2013/04/04 An Additional Spacer Is Now Used in the Crankshaft Pulley Group of Certain C7 and C9 Marine Engines {1205}
C9.3 Engines for Caterpillar Built Machines Turbocharger - Remove and Install - Cooled by Coolant
C9.3 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install