New 7E5085 Bushing Replaces Former 2M4314 Bushing In Fuel Injection Pump
Usage:
Description of Change: A new phosphate-coated bushing (charcoal colored) is used in the fuel injection pump group. A shallow lip is machined on the top side of the bushing for easy identification. The new bushing requires less torque 160 ± 14 N·m (120 ± 10 lb ft) when installed. The former zinc-plated bushing was tightened to 205 ± 14 N·m (153 ± 10 lb ft).
Adaptable To: The new 7E5085 Bushing is a direct replacement for the former 2M4314 Bushing.
NOTE: Tightening the new bushing to the former bushing torque may result in damage to the fuel injection pump housing.
Typical example of location of bushing.
Caterpillar Information System:
1990/12/01 New Air Compressor Crankshaft Has Improved Spline Lubrication
1990/12/01 Improved Fuel Injection Pump Groups Have New Injector Groups
1990/12/01 Tools Available For Out-of-chassis Dynamometer Testing Of Electronic Engines
1990/12/01 Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01 New Rotor Used In Brakesaver Group; Regulator Valve Improved
1990/12/01 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults)
1990/12/01 New Engine Magnetic Speed Sensor
1990/12/01 New Seals Available For Parts Service Of Noncurrent Water Lines Group
1990/12/01 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/11/01 New Bearing Kits Used In Turbocharger Cartridge Groups
1990/11/01 Correct Procedures For Starting, Stopping And Transporting A Product With A Turbocharged Engine
1990/11/01 Service Tips For Piston Cooling Jets (Tubes)
1990/12/01 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group
1990/12/01 Correct Handling And Installation Of Temperature Switch Assemblies
1991/01/01 New 3E0020 Vehicle Speed Buffer Used
1991/01/01 Update Information For Exhaust Manifolds
1991/01/01 Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01 New Program Measures Customer Satisfaction
1991/01/01 List Of Service Publications
1991/01/01 Incorrect Specification For Tightening Turbocharger Compressor Nut In Service Manual For 3306B Diesel Truck Engine, SEBR0545-01
1991/03/01 Be Sure To Remove All Air From The Fuel System On A Truck That Has Run Out Of Fuel, Had The Fuel Filter Changed, Or Had The Governor Removed{1250,1256,1261,1264,1274}
1991/03/01 New Bracket Assemblies Used In Lifter Group{1209,1281}
1991/03/01 New 0R3231 Remanufactured 3208 Truck Engine Available{1000,7754}
1991/03/01 New Front Crankshaft Seal Used{1160,1202}