Remanufactured Camshafts And Cam Kits Available For Parts Service
Usage:
3200, 3300, And 3400 Families Of Truck Engines
Reference: Information Release Memo (IRM), 12, PELE0170, "Remanufactured Camshafts And Cam Kits For 3200, 3300, And 3400 Engines ". Core Acceptance Guide, SELD0049, "Camshafts And Camshaft Kits ".
Remanufactured Camshafts and Cam Kits are available for parts service for the above engine families. Priced at approximately 30 to 50 percent of new, this product program offers another support service for dealer overhauls and qualifies for dealer rebates (U.S. dealers only). Also, Remanufactured Camshafts and Cam Kits are covered by the same factory warranty extended to new parts.
See the Reference for more complete information.
Caterpillar Information System:
1990/12/01 New Rotor Used In Brakesaver Group; Regulator Valve Improved
1990/12/01 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults)
1990/12/01 New Engine Magnetic Speed Sensor
1990/12/01 New Seals Available For Parts Service Of Noncurrent Water Lines Group
1990/12/01 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/11/01 New Bearing Kits Used In Turbocharger Cartridge Groups
1990/11/01 Correct Procedures For Starting, Stopping And Transporting A Product With A Turbocharged Engine
1990/11/01 Service Tips For Piston Cooling Jets (Tubes)
1990/11/01 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01
1990/11/01 Service Manual SENR3479-04 Available For Troubleshooting Engine Test Procedures
1990/11/01 New Camshaft Has Improved Wear Resistance
1990/11/01 New Roller Camshaft Used
1990/12/01 Tools Available For Out-of-chassis Dynamometer Testing Of Electronic Engines
1990/12/01 Improved Fuel Injection Pump Groups Have New Injector Groups
1990/12/01 New Air Compressor Crankshaft Has Improved Spline Lubrication
1990/12/01 New 7E5085 Bushing Replaces Former 2M4314 Bushing In Fuel Injection Pump
1990/12/01 Improved 9W1077 Start Switch Assembly And 7N4160 Heat Start Switch Group
1990/12/01 Correct Handling And Installation Of Temperature Switch Assemblies
1991/01/01 New 3E0020 Vehicle Speed Buffer Used
1991/01/01 Update Information For Exhaust Manifolds
1991/01/01 Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01 New Program Measures Customer Satisfaction
1991/01/01 List Of Service Publications
1991/01/01 Incorrect Specification For Tightening Turbocharger Compressor Nut In Service Manual For 3306B Diesel Truck Engine, SEBR0545-01