Service Manual SENR3479-04 Available For Troubleshooting Engine Test Procedures
Usage:
3406B (PEEC) Truck Engines
Service Manual Module "Troubleshooting 3406B (PEEC) Truck Engine Test Procedures " Form SENR3479-04, electronic troubleshooting guide has been updated to simplify and improve problem diagnosis on PEEC engines. The new format has procedures that are easier to follow, has more information on system and component operation, and encourages use of good troubleshooting fundamentals. New procedures have been added for intermittent problems, logged diagnostic codes, vehicle speed calibration, Multi-Torque, and other conditions not included in previous versions. Discard previous versions and order the new version.
Caterpillar Information System:
1990/11/01 New Camshaft Has Improved Wear Resistance
1990/11/01 New Roller Camshaft Used
1990/11/01 Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75 ' Bore Cylinder Blocks
1990/11/01 Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar
1990/11/01 Modification Of 1U7791 Valve Seat Driver
1990/11/01 New Exhaust Manifold Bolt Tightening Procedure
1990/11/01 New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01 New Shim Improves Low Idle Stability Of Governor
1990/10/01 List Of Service Publications
1990/10/01 4C6600 Battery Voltmeter For Determining Battery Percent Of Charge
1990/10/01 New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/10/01 Engine Service Training Literature Uses New Form Number
1990/11/01 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01
1990/11/01 Service Tips For Piston Cooling Jets (Tubes)
1990/11/01 Correct Procedures For Starting, Stopping And Transporting A Product With A Turbocharged Engine
1990/11/01 New Bearing Kits Used In Turbocharger Cartridge Groups
1990/12/01 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01 New Seals Available For Parts Service Of Noncurrent Water Lines Group
1990/12/01 New Engine Magnetic Speed Sensor
1990/12/01 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults)
1990/12/01 New Rotor Used In Brakesaver Group; Regulator Valve Improved
1990/12/01 Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01 Tools Available For Out-of-chassis Dynamometer Testing Of Electronic Engines
1990/12/01 Improved Fuel Injection Pump Groups Have New Injector Groups