1990/11/01 Caterpillar


Some Components Of The 7E3580 Engine Adapter Group For Allison AT545, MT543D, And MT653DRD Transmissions Are Not Serviced By Caterpillar

Usage:


3116 (7SF) Truck Engines with Allison AT545, MT543D, And MT653DRD Transmissions (an Attachment)

Some components of the 7E3580 Engine Adapter Group, used with Allison AT545, MT543D, And MT653DRD Transmissions installed on 3116 Truck Engines, are not serviced by Caterpillar. The illustration and chart identify the components of the adapter group that are serviced only by Allison. Make note of this information on the appropriate page of the Parts Manuals for 3116 ATAAC Truck Engines, SEBP1878 and SEBP1879.


Components of the 7E3580 Engine Adapter Group serviced by Allison.

Caterpillar Information System:

1990/11/01 Modification Of 1U7791 Valve Seat Driver
1990/11/01 New Exhaust Manifold Bolt Tightening Procedure
1990/11/01 New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups
1990/11/01 New Shim Improves Low Idle Stability Of Governor
1990/10/01 List Of Service Publications
1990/10/01 4C6600 Battery Voltmeter For Determining Battery Percent Of Charge
1990/10/01 New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/10/01 Engine Service Training Literature Uses New Form Number
1990/10/01 New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01 Increased Capacity Oil Sumps Require Additional Oil And Different Maintenance Interval
1990/10/01 Front Trunnion Bolts May Come Loose
1990/10/01 Improved 7C1757 Exhaust Manifold Group
1990/11/01 Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75 ' Bore Cylinder Blocks
1990/11/01 New Roller Camshaft Used
1990/11/01 New Camshaft Has Improved Wear Resistance
1990/11/01 Service Manual SENR3479-04 Available For Troubleshooting Engine Test Procedures
1990/11/01 Use Status Screen On Electronic Control Analyzer Programmer (ECAP) When Checking The Calibration Of The Timing And Rack Sensors; Correction To Systems Operation, Testing & Adjusting for 3406B (PEEC) Diesel Truck Engine, Form SENR3485-01
1990/11/01 Service Tips For Piston Cooling Jets (Tubes)
1990/11/01 Correct Procedures For Starting, Stopping And Transporting A Product With A Turbocharged Engine
1990/11/01 New Bearing Kits Used In Turbocharger Cartridge Groups
1990/12/01 New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01 New Seals Available For Parts Service Of Noncurrent Water Lines Group
1990/12/01 New Engine Magnetic Speed Sensor
1990/12/01 Personality Module Software Updated; Do Not Troubleshoot Diagnostic Code 55 (No Detected Faults)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.