C280-16 Generator Set Engine for Nuclear Applications Caterpillar


Air Pressure Regulator Group

Usage:

C280-16 ENS


Illustration 1g03353180
Front view of engine

Table 1
Specification for 355-0550 Air Pressure Regulator Gp 
Item  Qty  Part  Specification Description 
433-7551 Flange  Torque to 330 ± 24 N·m (243 ± 18 lb ft).
If required, tighten the flange for an additional turn angle of maximum 360 degrees. 
Before assembly, apply white Loctite Low Breakloose PST to all pipe threads. 

Caterpillar Information System:

C280-16 Generator Set Engine for Nuclear Applications Engine Mount
C280-16 Generator Set Engine for Nuclear Applications Engine Oil Lines
C280-16 Generator Set Engine for Nuclear Applications Air Cleaner Adapter
C280-16 Generator Set Engine for Nuclear Applications Engine Oil Lines
C280-16 Generator Set Engine for Nuclear Applications Engine Oil Pan
3516C HD Petroleum Well Service Engines Speed Control - Test
C280-16 Generator Set Engine for Nuclear Applications Thermocouple
3516C HD Petroleum Well Service Engines Sensor Supply - Test
C4.4 Industrial Engine Fuel System Secondary Filter - Replace
C280-16 Generator Set Engine for Nuclear Applications Valve Mechanism Cover
C280-16 Generator Set Engine for Nuclear Applications Water Pump
G3516H and G3520H Generator Set Engines Cylinder Block
374F Excavator Hydraulic System Relief Valve (Pilot)
C13 Industrial Engines Plate Locations and Film Locations
C1.5 and C2.2 Industrial Engines ARD Is Disabled
2013/03/08 Caterpillar Electronic Technician (Cat® ET) 2013A Change to the Injector Trim File Error Message {0785}
C13, C15, and C18 Tier 4 Final Engines Shutdown (Ground Level) - Test
C13, C15, and C18 Tier 4 Final Engines Cooling Fan Reversing - Test
2013/03/12 Do Not Reuse New Integral Seals on Certain C32 Marine Engines {1052, 1071, 1307, 7555}
3500B Generator Sets Coolant (DEAC) - Change
374F Excavator Hydraulic System Accumulator (Pilot)
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620} Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
G3516H and G3520H Generator Set Engines Cylinder Head
G3516H and G3520H Generator Set Engines Cover Group (Front Housing)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.