G3516H and G3520H Generator Set Engines Caterpillar

Camshaft Bearing Position

Usage:

G3520H GFP

Show/hide table




Illustration 1	g03350475

Show/hide table

Table 1
Specification for 362-1165 Cylinder Block
Item	Qty	Part	Specification Description
Install camshaft bearings into the cylinder block at the following locations:
-	-	-	Position (A) is 2200.0 ± 1.5 mm (86.61 ± 0.06 inch).
-	-	-	Position (B) is 1930.0 ± 1.5 mm (75.98 ± 0.06 inch).
-	-	-	Position (C) is 1660.0 ± 1.5 mm (65.35 ± 0.06 inch).
-	-	-	Position (D) is 1390.0 ± 1.5 mm (54.72 ± 0.06 inch).
-	-	-	Position (E) is 1120.0 ± 1.5 mm (44.09 ± 0.06 inch).
-	-	-	Position (F) is 850.0 ± 1.5 mm (33.46 ± 0.06 inch).
-	-	-	Position (G) is 580.0 ± 1.5 mm (22.83 ± 0.06 inch).
-	-	-	Position (H) is 310.0 ± 1.5 mm (12.20 ± 0.06 inch).
-	-	-	Position (J) is 40.0 ± 1.5 mm (1.57 ± 0.06 inch).

Caterpillar Information System:

C7.1 Industrial Engine Engine Oil and Filter - Change

G3516H and G3520H Generator Set Engines Flexible Coupling

G3516H and G3520H Generator Set Engines Accessory Drive

G3516H and G3520H Generator Set Engines Valve Mechanism

2013/04/25 Improved Coolant Gasket Used on Certain 3500 and G3500 Engines {1353, 1380, 7555}

C27 and C32 Generator Sets Generator Operation

436-1749 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-1749 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}

C7.1 Industrial Engine Coolant (ELC) - Change

G3516H and G3520H Generator Set Engines Water Lines

G3516H and G3520H Generator Set Engines Water Lines

C7.1 Industrial Engine Coolant (Commercial Heavy-Duty) - Change

C1.5 and C2.2 Engines for Caterpillar Built Machines Air in Fuel - Test

436-1678 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-1678 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}

436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}

C27 and C32 Generator Sets Refill Capacities

2013/03/05 A New Procedure Is Now Used When Installing The Auxiliary Sea Water Pump On Certain C32 Generator Sets and Certain C32 Marine Engines. {1371}

C175-16 Locomotive Engine Water Pump - Disassemble

C175-16 Locomotive Engine Water Pump - Assemble

C175-16 Locomotive Engine Auxiliary Water Pump - Disassemble

C175-16 Locomotive Engine Auxiliary Water Pump - Assemble

C32 Marine Engine Fumes Disposal Filter Element - Replace

C27 and C32 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped

C175-16 Locomotive Engine Engine Oil Cooler - Disassemble

C175-16 Locomotive Engine Engine Oil Cooler - Assemble