Auxiliary Water Pump - Disassemble
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 1U-9895 | Crossblock | 1 |
1P-0820 | Hydraulic Puller | 1 | |
126-7181 | Sliding Plate | 2 | |
3H-0465 | Push-Puller Plate | 6 | |
2S-4680 | Stud | 2 | |
350-7768 | Electric Hydraulic Pump Gp (115 V) | 1 | |
350-7769 | Electric Hydraulic Pump Gp (230 V) | 1 | |
2L-4523 | Bolt | 2 | |
5P-8244 | Hard Washer | 2 | |
6B-6682 | Full Nut | 2 | |
2J-3506 | Full Nut | 2 |
Start By:
- Remove the auxiliary water pump.
- Remove nuts (1). Remove cover (2) from water pump (3).
Show/hide table
Illustration 2 g01204935 - Remove O-ring seal (4) from cover (2).
Show/hide table
Illustration 3 g01207677 Show/hide tablePersonal injury can result from being struck by parts propelled by a released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to release the spring force.
- Use Tooling (A) in order to remove impeller (5).
Show/hide table
Illustration 4 g01207678 - Remove spring (6).
Show/hide table
Illustration 5 g01207696 - Turn over water pump (3). Remove bolts (8). Remove shaft (7) and thrust washer (9). When you remove shaft (7) the seal ring will be free from shaft (7).
Show/hide table
Illustration 6 g01207698 - Remove seal (10) and ring assembly (11).
Show/hide table
Illustration 7 g01207700 - Turn over water pump (3). Remove the rubber seal and the ceramic ring of seal group (12).
Show/hide table
Illustration 1 | g01204934 |
Caterpillar Information System:
C175-16 Locomotive Engine Water Pump - Assemble
C175-16 Locomotive Engine Water Pump - Disassemble
2013/03/05 A New Procedure Is Now Used When Installing The Auxiliary Sea Water Pump On Certain C32 Generator Sets and Certain C32 Marine Engines. {1371}
C27 and C32 Generator Sets Refill Capacities
436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-3145 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
436-1678 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-1678 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
G3516H and G3520H Generator Set Engines Camshaft Bearing Position
C7.1 Industrial Engine Engine Oil and Filter - Change
G3516H and G3520H Generator Set Engines Flexible Coupling
G3516H and G3520H Generator Set Engines Accessory Drive
G3516H and G3520H Generator Set Engines Valve Mechanism
2013/04/25 Improved Coolant Gasket Used on Certain 3500 and G3500 Engines {1353, 1380, 7555}
C175-16 Locomotive Engine Auxiliary Water Pump - Assemble
C32 Marine Engine Fumes Disposal Filter Element - Replace
C27 and C32 Generator Sets Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
C175-16 Locomotive Engine Engine Oil Cooler - Disassemble
C175-16 Locomotive Engine Engine Oil Cooler - Assemble
C175-16 Locomotive Engine Engine Oil Pump - Disassemble
C175-16 Locomotive Engine Engine Oil Pump - Assemble
C175-16 Locomotive Engine Valve Lifter - Disassemble
C175-16 Locomotive Engine Valve Lifter - Assemble
C175-16 Locomotive Engine Inlet and Exhaust Valve Springs - Remove and Install
C175-16 Locomotive Engine Inlet and Exhaust Valves - Remove and Install
C175-16 Locomotive Engine Inlet and Exhaust Valve Guides - Remove and Install