G3516H and G3520H Generator Set Engines Caterpillar


Exhaust Manifold

Usage:

G3520H GFP


Illustration 1g03349917

Table 1
Specification for 377-2426 Exhaust Manifold Gp 
Item  Qty  Part  Specification Description 
Ensure that the bellows are installed in the proper direction as marked on the bellows by an arrow. 
228  3E-6916 Full Nut  Before assembly, lubricate the threads and the bearing surfaces of the nuts with Loctite C5ACopper Anti-Seize. 
64  6L-8550 High Temperature Bolt  Use the following procedure to tighten the bolts:
1. Tighten the bolts to 55 ± 5 N·m (41 ± 4 lb ft).
2. Again tighten the bolts to 55 ± 5 N·m (41 ± 4 lb ft)
12  6V-4605 Locknut  Before assembly, lubricate the threads and the bearing surfaces of the locknuts with Loctite C5ACopper Anti-Seize. 


Illustration 2g03349920
Top view

Table 2
Item  Qty  Part  Specification Description 
0S-1591 Bolt  Before assembly, apply blue Loctite 242 to the threads. 
6V-5766 Bolt  Before assembly, lubricate the threads and the bearing surfaces of the bolts with Loctite C5ACopper Anti-Seize. 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.