Camshaft
Show/hide table
| |
| Illustration 1 | g03379965 |
|
(1) Left-hand camshaft assembly
(2) Right-hand camshaft assembly | |
Show/hide table
| |
| Illustration 2 | g03379966 |
|
382-3701 Camshaft As | |
Show/hide table
| Specification for 393-0082 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| A | - | - | Thickness of the groove in the new camshaft assembly for the thrust washer is |
| B | 2 | 5B-5821 Dowel | Extension of the dowel is |
| C | 2 | 7N-3218 Thrust Washer | Thickness of the new thrust washer is |
| D | - | - | Diameter of bearing journals for a new camshaft is |
| 3 | 16 | 5P-0076 Bolt | Torque to |
| E | 2 | 4N-1650 Dowel | Extension of the dowel is |
Show/hide table
| |
| Illustration 3 | g03379970 |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure in order to determine the camshaft lobe lift: |
| 1. Measure camshaft lobe height (G). | |||
| 2. Measure base circle (H). | |||
| 3. Subtract the base circle (H) from the camshaft lobe height (G). The difference is the actual camshaft lobe lift. | |||
| F | - | - | Specified camshaft lobe lift: |
| Inlet lobe is |
|||
| Exhaust lobe is |
Caterpillar Information System:
C27 and C32 Tier 4 Final Marine Engines Vibration Damper and Pulley
2013/04/02 New Liquid Level Sensor Gp Is Now Used as Service Replacement on Certain Cat Products {1263, 7422}
C32 Marine Engines Fuel Filter
C32 Marine Engines Alternator Mounting
C32 Marine Engines Turbocharger Water Lines
C32 Marine Engines Water Pump
C32 Marine Engines Engine Oil Lines
C27 and C32 Tier 4 Final Marine Engines Engine Oil Lines
C32 Marine Engines Fuel Filter Base
C27 and C32 Tier 4 Final Marine Engines Air Lines
C32 Marine Engines Vibration Damper and Pulley
C27 and C32 Tier 4 Final Marine Engines Vibration Damper and Pulley
G3516H and G3520H Generator Set Engines Exhaust Manifold
G3516H and G3520H Generator Set Engines Water Temperature Regulator
G3516H and G3520H Generator Set Engines Engine Oil Pan
C1.5 and C2.2 Engines for Caterpillar Built Machines Air in Fuel - Test
C7.1 Industrial Engine Coolant (Commercial Heavy-Duty) - Change
G3516H and G3520H Generator Set Engines Water Lines
G3516H and G3520H Generator Set Engines Water Lines
C7.1 Industrial Engine Coolant (ELC) - Change
436-1749 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 436-1749 Major Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
C27 and C32 Generator Sets Generator Operation
2013/04/25 Improved Coolant Gasket Used on Certain 3500 and G3500 Engines {1353, 1380, 7555}
G3516H and G3520H Generator Set Engines Valve Mechanism