Turbocharger - Inspect
Use the following procedures in order to inspect the turbocharger and related components are functioning correctly.
Show/hide table
Illustration 1 | g03343331 |
Left side engine view (1) Turbine housing (2) Gaskets |
- Inspect the bolted join locations for exhaust gas leaks.
- If exhaust gas leaks are present, tighten the bolts that secure the components, or replace gaskets (2).
Show/hide table
Illustration 2 g03343379 - Inspect inlet hose (3) of the compressor housing (5) for air leakage.
- Inspect the suction side of the inlet hose for loose connections or cracks.
- If air leakage is present, change clamp (4), or the inlet hose.
Show/hide table
Illustration 3 g02918097 - Check the radial clearance of the compressor wheel and turbine wheel of the turbocharger. Replace the turbocharger assembly if the compressor wheel or turbine wheel contact the housing.
Caterpillar Information System:
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C7.1 Industrial Engine Product Description
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Valve
2013/02/06 Always Purge the Air From the Engine Cooling System {1350, 1353}
C7.1 Industrial Engine Model View Illustrations
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C4.4 Industrial Engine Engine Electronics
C27 Generator Set Fluid Recommendations
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714} Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
C27 Generator Set Refill Capacities
C8.7 and C12.9 Marine Engines Exhaust Has Excessive White Smoke
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823} Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
C7.1 Marine Engine Camshaft Bearings - Remove and Install
C7.1 Marine Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Marine Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C7.1 Marine Engine Crankshaft Timing Ring - Remove and Install
C7.1 Marine Engine Crankshaft Gear - Remove and Install
C7.1 Marine Engine Bearing Clearance - Check
C7.1 Marine Engine Lifter Group - Remove and Install
C7.1 Marine Engine Camshaft - Remove and Install
C7.1 Marine Engine Camshaft Gear - Remove and Install