Refill Capacities
The capacity of the engine lubrication system includes the capacity of the oil filters that are installed at the factory. Auxiliary oil filter systems (if equipped) will require additional oil. Refer to the specifications that are provided by the OEM of the auxiliary oil filter system.
Show/hide table
| C27 Engine
Approximate Refill Capacities |
|
|---|---|
| Compartment or System | Capacity |
| Engine Crankcase | |
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity can include the following components: engine, expansion tank, radiator and piping.
Refer to the specifications that are provided by Caterpillar or the OEM of the installation. Record the total cooling system capacity in the appropriate Table.
Show/hide table
| C27 Engine
Approximate Refill Capacities |
|
|---|---|
| Compartment or System | Capacity |
| Engine Only | |
| External System (OEM)(1) | |
| Total Cooling System | |
Show/hide table
| (1) | Radiator |
Caterpillar Information System:
TA2 Inspection for C32 Marine Propulsion Engines{1000} TA2 Inspection for C32 Marine Propulsion Engines{1000}
2013/03/22 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3512C and 3516C Engines {1379, 7553}
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
C7.1 Industrial Engine Electrical System
525D, 535D, 545D, 555D Wheel Skidder High Pressure Fuel Lines
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
312F and 313F Excavator Machine System Specifications Cab
C7.1 Industrial Engine General Hazard Information
3516C Petroleum Well Service Engine Monitoring System
2013/03/13 New Inlet Air Tube Assembly Is Used for 3512C and 3516C Large Frame Tier 3 Marine Engines {1071}
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714} Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
C27 Generator Set Fluid Recommendations
C4.4 Industrial Engine Engine Electronics
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C7.1 Industrial Engine Model View Illustrations
2013/02/06 Always Purge the Air From the Engine Cooling System {1350, 1353}
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Valve
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
C7.1 Industrial Engine Product Description
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C3.8 Engines for Caterpillar Built Machines Turbocharger - Inspect