Water Valve
Show/hide table
| |
| Illustration 1 | g03659411 |
Show/hide table
| Specification for 431-9716 Water Control Valve Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| 1 | 2 | Apply Loctite 271TM. | |
| 2 | 1 | 360-3477 Special Nut | Tighten to |
| 3 | 3 | Apply liquid gasket material between surfaces when assembling. | |
| 4 | 1 | Apply Loctite 243TM. | |
| 5 | 1 | Use shim as required to obtain |
|
Caterpillar Information System:
2013/02/06 Always Purge the Air From the Engine Cooling System {1350, 1353}
C7.1 Industrial Engine Model View Illustrations
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C4.4 Industrial Engine Engine Electronics
C27 Generator Set Fluid Recommendations
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714} Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
C27 Generator Set Refill Capacities
TA2 Inspection for C32 Marine Propulsion Engines{1000} TA2 Inspection for C32 Marine Propulsion Engines{1000}
2013/03/22 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3512C and 3516C Engines {1379, 7553}
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
C7.1 Industrial Engine Product Description
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C3.8 Engines for Caterpillar Built Machines Turbocharger - Inspect
C8.7 and C12.9 Marine Engines Exhaust Has Excessive White Smoke
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823} Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
C7.1 Marine Engine Camshaft Bearings - Remove and Install
C7.1 Marine Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Marine Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C7.1 Marine Engine Crankshaft Timing Ring - Remove and Install