Engine Oil Pan Plate - Remove and Install
Start By:
- Remove the engine oil pan.
- Remove the flywheel housing.
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud M8 by 40 mm |
4 |
B | 165-2601 | Silicon Sealant | - |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Support engine oil pan plate (3). Remove bolts (2) and (4) and remove engine oil pan plate (3) and gasket (1).
Show/hide table
Illustration 1 | g01342059 |
- Install Tooling (A) to Positions (X) in the cylinder block.
Show/hide table
Illustration 3 g01544893 Tooling (A) is not shown for clarity. - Apply a bead of Tooling (B) to Positions (Y).
Show/hide table
Illustration 4 g01342059 - Position a new gasket (1) onto engine oil pan plate (3).
- Align engine oil pan plate (3) with Tooling (B). Install engine oil pan plate (3) to the cylinder block.
- Install bolts (2) and (4) and tighten to a torque of
22 N·m (195 lb in) .
Show/hide table
Illustration 2 | g01544875 |
End By:
- Install the engine oil pan.
- Install the flywheel housing.
Caterpillar Information System:
C7.1 Marine Engine Camshaft Bearings - Remove and Install
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823} Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
C8.7 and C12.9 Marine Engines Exhaust Has Excessive White Smoke
C3.8 Engines for Caterpillar Built Machines Turbocharger - Inspect
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C7.1 Industrial Engine Product Description
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Valve
2013/02/06 Always Purge the Air From the Engine Cooling System {1350, 1353}
C7.1 Industrial Engine Model View Illustrations
C4.4 Industrial Engine Welding on Engines with Electronic Controls
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Marine Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C7.1 Marine Engine Crankshaft Timing Ring - Remove and Install
C7.1 Marine Engine Crankshaft Gear - Remove and Install
C7.1 Marine Engine Bearing Clearance - Check
C7.1 Marine Engine Lifter Group - Remove and Install
C7.1 Marine Engine Camshaft - Remove and Install
C7.1 Marine Engine Camshaft Gear - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valve Springs - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Marine Engine Engine Oil Relief Valve - Remove and Install
C7.1 Marine Engine Air Cleaner Housing - Remove and Install