Crankshaft Timing Ring - Remove and Install
Start By:
- Remove the crankshaft.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Support crankshaft (1) on a suitable stand.
- Remove screws (2) from crankshaft timing ring (3). Do not reuse the screws.
- Carefully remove crankshaft timing ring (3) from crankshaft (1). Do not reuse the crankshaft timing ring.
Note: Ensure that seal surface (4) of the crankshaft is not damaged when the crankshaft timing ring is removed.
Note: Do not remove dowel (5) from crankshaft (1) unless the dowel is damaged.
Show/hide table
Illustration 1 | g01341462 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Support crankshaft (1) on a suitable stand.
Show/hide table
Illustration 2 g01341462 - If dowel (5) was removed, install a new dowel to crankshaft (1).
- Position new crankshaft timing ring (3) on the crankshaft with the teeth toward the crankshaft Web. Align the hole in crankshaft timing ring (3) with dowel (5) in the crankshaft. Install crankshaft timing ring (3) to crankshaft (1).
Note: Ensure that seal surface (4) on the crankshaft is not damaged when the crankshaft timing ring is installed.
- Install new screws (2). Tighten screws (2) to a torque of
9 N·m (80 lb in) .
End By:
- Install the crankshaft.
Caterpillar Information System:
C7.1 Marine Engine Crankshaft Main Bearings - Remove and Install - Crankshaft in position
C7.1 Marine Engine Piston Cooling Jets - Remove and Install
C7.1 Marine Engine Engine Oil Pan Plate - Remove and Install
C7.1 Marine Engine Camshaft Bearings - Remove and Install
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823} Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
C8.7 and C12.9 Marine Engines Exhaust Has Excessive White Smoke
C3.8 Engines for Caterpillar Built Machines Turbocharger - Inspect
C4.4 and C7.1 Engines Exhaust Has Excessive Black Smoke
C7.1 Industrial Engine Product Description
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Hydraulic Tank
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Pump
777F, 777G, and 785D OEM Off-Highway Truck/Tractors Water Delivery System Water Valve
C7.1 Marine Engine Crankshaft Gear - Remove and Install
C7.1 Marine Engine Bearing Clearance - Check
C7.1 Marine Engine Lifter Group - Remove and Install
C7.1 Marine Engine Camshaft - Remove and Install
C7.1 Marine Engine Camshaft Gear - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valve Springs - Remove and Install
C7.1 Marine Engine Inlet and Exhaust Valves - Remove and Install
C7.1 Marine Engine Engine Oil Relief Valve - Remove and Install
C7.1 Marine Engine Air Cleaner Housing - Remove and Install
C7.1 Marine Engine Jacket Water Heater - Remove and Install
C7.1 Marine Engine Electric Starting Motor - Remove and Install
C7.1 Industrial Engine Plate Locations and Film Locations