Cab
Show/hide table
| |
| Illustration 1 | g03342581 |
Show/hide table
| Specification fo 372-9524 Cab Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 8T-4190 Bolt | Torque to |
| 2 | 3 | 8T-4191 Bolt | Torque to |
Show/hide table
| |
| Illustration 2 | g03342582 |
|
Section B-B | |
Show/hide table
| Specification fo 372-9524 Cab Gp | |||
| Item | Qty | Part | Specification Description |
| 3 | 5 | 8T-4648 Bolt | Before assembly, apply red Loctite 271 to the threads. |
| 4 | 5 | 8T-4179 Bolt | Before assembly, apply red Loctite 271 to the threads. |
| 5 | 2 | 8T-4192 Bolt | Before assembly, apply red Loctite 271 to the threads. |
Caterpillar Information System:
C7.1 Industrial Engine General Hazard Information
3516C Petroleum Well Service Engine Monitoring System
2013/03/13 New Inlet Air Tube Assembly Is Used for 3512C and 3516C Large Frame Tier 3 Marine Engines {1071}
2013/02/01 New Inlet Air Tube Assembly Is Used for 3512C Tier 3 Marine Engines {1071}
3516C Petroleum Well Service Engine Refill Capacities
3516C Petroleum Well Service Engine Product Description
3516C HD Petroleum Well Service Engine Maintenance Interval Schedule
2013/02/13 An Improved Transmission Planetary Shaft is Used on Certain CX31 On-Highway Transmissions {3160, 7620}
320E and 323E Excavators Machine System Specifications Boom Lines
320 GC, 320 and 323 Excavator Machine Systems Specifications Transport Lock
C32 Auxiliary Engine Overhaul (Major)
C32 Auxiliary Engine Bolts (Fuel Filter Base) - Inspect/Replace
320E and 323E Excavators Machine System Specifications Auxiliary Hydraulic Lines
525D, 535D, 545D, 555D Wheel Skidder High Pressure Fuel Lines
C7.1 Industrial Engine Electrical System
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Data Link Configuration Status - Test
3516C HD Petroleum Well Service Engines Sensor Signal (Analog, Active) - Test
2013/02/18 New Electronic Thermostats Are Used for C175 Engines {135V, 7610}
2013/03/22 A New Coupling Assembly Is Used on Heat Exchangers for Certain 3512C and 3516C Engines {1379, 7553}
TA2 Inspection for C32 Marine Propulsion Engines{1000} TA2 Inspection for C32 Marine Propulsion Engines{1000}
C27 Generator Set Refill Capacities
Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714} Procedure for Installing the New Unit Injector Hydraulic Pump Group on Certain C9 Marine Engines{1714}
C27 Generator Set Fluid Recommendations
C4.4 Industrial Engine Engine Electronics