Camshaft
Show/hide table
| |
| Illustration 1 | g03327351 |
|
(1) Left-hand camshaft assembly
(2) Right-hand camshaft assembly | |
Show/hide table
| Specification for 381-1967 Camshaft Gp | |||
| Item | Qty | Part | Specification Description |
| A | - | - | Thickness of groove for the thrust washer in a new camshaft assembly is |
| B | 2 | 5B-5821 Dowel | Extension of the dowel is |
| C | 2 | 7N-3218 Thrust Washer | Thickness of a new thrust washer is |
| D | - | - | Diameter of bearing journals in a new camshaft assembly is |
Show/hide table
| |
| Illustration 2 | g03327356 |
Show/hide table
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure in order to determine the camshaft lobe lift: |
| 1. Measure camshaft lobe height (F). | |||
| 2. Measure base circle (G). | |||
| 3. Subtract the base circle (G) from the camshaft lobe height (F). The difference is the actual camshaft lobe lift. | |||
| E | - | - | Specified camshaft lobe lift: |
| Inlet lobe is |
|||
| Injector lobe is |
|||
| Exhaust lobe is |
Caterpillar Information System:
3500 Industrial Engines Air Starting Motor
3512B and 3512C Petroleum Generator Set Engines Engine Oil Lines
3508B Industrial Engines Air Starting Motor Pressure Regulating Valve
2012/11/30 New Taperlock Studs for Certain G3406, G3408 , and G3412 Engines {1057, 7553}
390F Excavator Specifications
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Switch Circuits - Test
TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000} TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Sensor Calibration Required - Test
3516B Engine Engine Oil Pan (Rear) - Remove and Install
3516B Engine Engine Oil Pan (Front) - Remove and Install
3500C Marine Engines Engine Oil Lines
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Crankcase Breather
3500 Industrial Engines Air Starting Motor
C1.5 and C2.2 Industrial Engines Balancer
3500B Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump
3516B Engine Fuel Filter Base - Remove and Install
Lip Type Seals {0599, 0733, 5050, 7555} Lip Type Seals {0599, 0733, 5050, 7555}
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Fuel System Operation
3500 Industrial Engines Air Cleaner
3500 Industrial Engines Engine Oil Sump Pump
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather