Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g03327330 |
Show/hide table
| |
| Illustration 2 | g03327346 |
|
View of area A | |
Show/hide table
| Specification for 394-3836 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 6 | 109-2332 O-Ring Seal | Lightly, lubricate the bore with the fluid that is being sealed. |
| 2 | 1 | 2W-1053 Plug | Torque to |
| 3 | 2 | 7N-7697 Plunger | Valves must start to open at a pressure difference of |
| Valves must be fully open at |
|||
| 4 | 2 | 6B-9202 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 5 | 2 | 0S-1594 Bolt | Use the following tightening sequence in order to tighten the clamp bolts: 1. Snug the clamp assembly to the tube assembly. 2. Tighten the clamp assembly to the elbow with mating group. 3. Then, tighten the clamp assembly to the tube assembly. |
| 6 | 2 | 0S-1571 Bolt | |
| 7 | 1 | 2W-1969 Bypass Valve | Valve must open with a pressure difference of |
| 8 | 1 | 2W-1635 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
Caterpillar Information System:
3508B Industrial Engines Air Starting Motor Pressure Regulating Valve
2012/11/30 New Taperlock Studs for Certain G3406, G3408 , and G3412 Engines {1057, 7553}
390F Excavator Specifications
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Switch Circuits - Test
TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000} TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Sensor Calibration Required - Test
3516B Engine Engine Oil Pan (Rear) - Remove and Install
3516B Engine Engine Oil Pan (Front) - Remove and Install
3500C Marine Engines Engine Oil Lines
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Engine Oil Lines
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Camshaft
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Crankcase Breather
3500 Industrial Engines Air Starting Motor
C1.5 and C2.2 Industrial Engines Balancer
3500B Engines Turbocharger
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump
3516B Engine Fuel Filter Base - Remove and Install
Lip Type Seals {0599, 0733, 5050, 7555} Lip Type Seals {0599, 0733, 5050, 7555}
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Fuel System Operation
3500 Industrial Engines Air Cleaner