Engine Oil Lines
Show/hide table
| |
| Illustration 1 | g03326846 |
Show/hide table
| Specification for 424-9762 Engine Oil Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 2W-1969 Bypass Valve | Oil cooler bypass valve must open with a pressure difference of |
| 2 | 1 | 2W-1635 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 3 | 1 | 2W-1053 Plug | Torque to |
| 4 | 2 | 7N-7697 Plunger | Cooling jet sequence valve: Valves must start to open at a pressure difference of Valves must be fully open at |
| 5 | 2 | 6B-9202 Spring | Length under test force is Test force is Free length after test is |
Caterpillar Information System:
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Engine Oil Lines
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500B High Displacement Thermocouple
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Cooler (NRS) - Test - If Equipped
C1.5 and C2.2 Engines for Caterpillar Built Machines Glow Plugs - Test
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump - Test
3500 Industrial Engines Engine Speed/Timing Sensor
3512B and 3512C Petroleum Generator Set Engines Exhaust Fitting
3500C Marine Engines Cover Group (Front Housing)
3512B and 3512C Petroleum Generator Set Engines Exhaust Elbow
3500C Marine Engines Cover (Vibration Damper Guard)
3516B Engine Engine Oil Pan (Front) - Remove and Install
3516B Engine Engine Oil Pan (Rear) - Remove and Install
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Sensor Calibration Required - Test
TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000} TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000}
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Switch Circuits - Test
390F Excavator Specifications
2012/11/30 New Taperlock Studs for Certain G3406, G3408 , and G3412 Engines {1057, 7553}
3508B Industrial Engines Air Starting Motor Pressure Regulating Valve
3512B and 3512C Petroleum Generator Set Engines Engine Oil Lines
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Camshaft
3500 Industrial Engines Air Starting Motor