3500B Engines Caterpillar


Turbocharger

Usage:

3508B LD7


Illustration 1g03327814

Table 1
Specification for 379-5310 Turbocharger Gp 
Item  Qty  Part  Specification description 
2N-2765 High Temperature Bolt  Before assembly, apply Loctite C5A copper anti-seize to the threads and bearing surfaces. 
2N-2766 Locknut  Torque to 54 ± 5 N·m (40 ± 4 lb ft)
6L-3005 Band Clamp  Use the following procedure to tighten the clamp assembly:

1. Tighten the clamp assembly to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in).
2. Gently hit around the clamp assembly with a soft hammer.
3. Again, tighten the clamp assembly to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in)
Use the following procedure to tighten the clamp assembly:

1. Tighten the clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in).
2. Gently hit around the clamp assembly with a soft hammer.
3. Again, tighten the clamp assembly to 14.0 ± 1.5 N·m (123.9 ± 13.3 lb in)

Caterpillar Information System:

C1.5 and C2.2 Industrial Engines Balancer
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Crankcase Breather
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Camshaft
3500 Industrial Engines Air Starting Motor
3512B and 3512C Petroleum Generator Set Engines Engine Oil Lines
3508B Industrial Engines Air Starting Motor Pressure Regulating Valve
2012/11/30 New Taperlock Studs for Certain G3406, G3408 , and G3412 Engines {1057, 7553}
390F Excavator Specifications
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Switch Circuits - Test
TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000} TA2 Technical Inspection for Certain 3512B and 3512C Petroleum Engines{1000}
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump
3516B Engine Fuel Filter Base - Remove and Install
Lip Type Seals {0599, 0733, 5050, 7555} Lip Type Seals {0599, 0733, 5050, 7555}
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Fuel System Operation
3500 Industrial Engines Air Cleaner
3500 Industrial Engines Engine Oil Sump Pump
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather
3500B Engines Radiator
C1.5 and C2.2 Industrial Engines Exhaust Cooler (NRS) - If equipped
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Combustion (ARD)
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Lifting Bracket
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Pump (ARD Air)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.