C1.5 and C2.2 Engines for Caterpillar Built Machines Caterpillar

Illustration 1	g03327839
Typical example

(1) Tighten the setscrews to the following torque. ... 9.8 N·m (87 lb in)

Note: The glow plug (2) for the ARD can be replaced. Refer to Operation and Maintenance Manual, "Glow Plugs (ARD Combustion) - Replace" for the correct procedure.

(3) Tighten the pipe to the following torque. ... 20 N·m (15 lb ft)

(4) Tighten the temperature sensor to the following torque. ... 30 N·m (22 lb ft)

(5) Tighten the studs to the following torque. ... 25 N·m (18 lb ft)

Illustration 2	g03329342
Typical example

(6) Tighten the nuts to the following torque. ... 25 N·m (18 lb ft)

(7) Tighten the bolts to the following torque. ... 25 N·m (18 lb ft)

Illustration 3	g03329350
Typical example

(8) Tighten the bolts to the following torque. ... 50 N·m (37 lb ft)

(9) Tighten the nuts to the following torque. ... 25 N·m (18 lb ft)

(10) Tighten the bolts to the following torque. ... 25 N·m (18 lb ft)

(11) Tighten the bolts to the following torque. ... 32.4 N·m (24 lb ft)