Fuel Filter Base - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 2P-8250 | Strap Wrench As | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Turn the fuel supply valve to the OFF position.
Show/hide table
Illustration 1 g03327485 - Remove fuel priming pump switch and breaker (1).
Show/hide table
Illustration 2 g00922347 - Use Tooling (A) and remove fuel filters (2).
Show/hide table
Illustration 3 g00922353 - Remove plate (3).
Show/hide table
Illustration 4 g00922354 - Disconnect tube assembly (6).
- Support fuel filter base (5) and remove bolts (4).
- Check O-ring seals (7) for wear or damage. Replace O-ring seals, if necessary.
Show/hide table
Illustration 6 g00922354 - Install bolts (4). Connect tube assembly (6) onto fuel filter base (5).
Show/hide table
Illustration 7 g00922353 - Install plate (3).
Show/hide table
Illustration 8 g03327485 - Install fuel priming pump switch and breaker (1).
Show/hide table
Illustration 9 g00922347 - Install fuel filters (2).
- Turn the fuel supply valve to the ON position.
Show/hide table
Illustration 5 | g00922355 |
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Transfer Pump
3500B Engines Turbocharger
C1.5 and C2.2 Industrial Engines Balancer
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Crankcase Breather
3500 Industrial Engines Air Starting Motor
3508B Industrial Engines Camshaft
3500 Industrial Engines Air Starting Motor
3512B and 3512C Petroleum Generator Set Engines Engine Oil Lines
3508B Industrial Engines Air Starting Motor Pressure Regulating Valve
2012/11/30 New Taperlock Studs for Certain G3406, G3408 , and G3412 Engines {1057, 7553}
390F Excavator Specifications
Lip Type Seals {0599, 0733, 5050, 7555} Lip Type Seals {0599, 0733, 5050, 7555}
3512B, 3512C, and 3516B Generator Set Engines with Dynamic Gas Blending Fuel System Operation
3500 Industrial Engines Air Cleaner
3500 Industrial Engines Engine Oil Sump Pump
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankcase Breather
3500B Engines Radiator
C1.5 and C2.2 Industrial Engines Exhaust Cooler (NRS) - If equipped
C1.5 and C2.2 Engines for Caterpillar Built Machines Exhaust Combustion (ARD)
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Lifting Bracket
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Pump (ARD Air)
3500 Industrial Engines Auxiliary Drive Shaft
3500B Engines Radiator