ECM Harness Connector Terminals
The Electronic Control Module (ECM) uses connectors that have 80 terminals to interface to the wiring harness. Differences in the keyway pattern ensure that the harness connectors cannot be wrongly installed.
Show/hide table
| |
| Illustration 1 | g03322763 |
|
Layout of the ECM connector pins | |
The pins on the harness connectors are not serviceable. If a pin or the connector is damaged, the harness must be replaced.
Caterpillar Information System:
C175-16 Locomotive Engine Air Lines - Aftercooler
C1.5 and C2.2 Industrial Engines Idle Validation Switch Circuit - Test
C175-16 Locomotive Engine Air Lines - Aftercooler
2013/03/21 New Water Ferrules Are Available for 3500 Engine Cylinder Heads {1124, 7555}
794 AC Off-Highway Truck Engine Starting
MT4400D AC Off-Highway Truck Fire Prevention and Explosion Prevention
2012/11/19 Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/26 Improved Exciter Rotor Design is Now Used on Certain Caterpillar Products {4454, 4465}
C175-16 and C175-20 Engines for Caterpillar Built Machines Alternator - Remove and Install
C175-16 Locomotive Engine Vibration Damper Guard
C175-16 Locomotive Engine Turbocharger Mounting
C175-16 Locomotive Engine Oil Pressure Regulator
C15 and C18 Engines Welding on Engines with Electronic Controls
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
3516C Locomotive Engines Selective Catalytic Reduction System Monitoring
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Actuator - Test
3512B and 3512C Petroleum Generator Set Engines Direct Fuel Control Mode - Test
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3408B
CG137-08 and CG137-12 Engines Aftercooler - Remove and Install - G3408B
421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000} 421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000}
3516B Engine Fuel Injector - Check
G3500 A3 Engines Air/Fuel Ratio Control - Adjust - NO<SUB>X</SUB> Feedback
CG137-08 and CG137-12 Engines Turbocharger - Remove and Install - G3408B