Air Lines - Aftercooler
Show/hide table
Illustration 1 | g03322748 |
Show/hide table
Illustration 2 | g03322749 |
Detail of aftercooler corner |
Show/hide table
Specifications for 293-6557 Air Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 8 | 239-6808 Clamp | Before assembly, lubricate the nut faces and threads with Loctite C5A copper anti-seize.
Tighten the clamp nut to |
2 | 4 | 295-6817 Insert | Before assembly, apply green Loctite 620 to the joint surfaces.
Seat the insert against housing. |
- | - | - | Before assembly, apply ultra blue Loctite 587 to the surfaces.
In a continuous bead of |
Caterpillar Information System:
C1.5 and C2.2 Industrial Engines Idle Validation Switch Circuit - Test
C175-16 Locomotive Engine Air Lines - Aftercooler
2013/03/21 New Water Ferrules Are Available for 3500 Engine Cylinder Heads {1124, 7555}
794 AC Off-Highway Truck Engine Starting
MT4400D AC Off-Highway Truck Fire Prevention and Explosion Prevention
2012/11/19 Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/26 Improved Exciter Rotor Design is Now Used on Certain Caterpillar Products {4454, 4465}
C175-16 and C175-20 Engines for Caterpillar Built Machines Alternator - Remove and Install
C175-16 Locomotive Engine Vibration Damper Guard
C175-16 Locomotive Engine Turbocharger Mounting
C175-16 Locomotive Engine Oil Pressure Regulator
C1.5 and C2.2 Engines for Caterpillar Built Machines Temperature Sensor (DOC Inlet)
C1.5 and C2.2 Engines for Caterpillar Built Machines ECM Harness Connector Terminals
C15 and C18 Engines Welding on Engines with Electronic Controls
Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620} Release Notes for VisionLink and VisionLink Store for All Caterpillar Products {7606, 7620}
3516C Locomotive Engines Selective Catalytic Reduction System Monitoring
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Fuel Actuator - Test
3512B and 3512C Petroleum Generator Set Engines Direct Fuel Control Mode - Test
CG137-08 and CG137-12 Engines Rotary Actuator (Carburetor) - Remove and Install - G3408B
CG137-08 and CG137-12 Engines Aftercooler - Remove and Install - G3408B
421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000} 421-9723 Top End Engine Overhaul Foundational Kit for 3412C Marine Engines{1000}
421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000} 421-9725 Top End Engine Overhaul Foundational Kit for 3412E Marine Engines{1000}
3516B Engine Fuel Injector - Check
G3500 A3 Engines Air/Fuel Ratio Control - Adjust - NO<SUB>X</SUB> Feedback