1989/02/01 Caterpillar


New Publication Available- "Coolant And Your Engine"

Usage:


A new publication, "Coolant And Your Engine," Form SEBD0970, provides an overview of fundamental coolant information. It includes general information about coolant properties, functional effects, coolant-related engine failures, service and periodic maintenance, and cooling system maintenance products. The booklet can be ordered through normal literature ordering channels.

This coolant publication complements two previously released publications on engine oil (Form SEBD0640) and diesel fuel (Form SEBD0717). These three publications together provide a wealth of general information on engine fluids that can help the user achieve satisfactory engine life.

Caterpillar Information System:

1989/02/01 Cold Start Procedures For 3406 (PEEC) Truck Engines
1989/02/01 Troubleshooting 3406B (PEEC) Truck Engines Equipped With Power Demand Cruise Control (PDCC)
1989/01/01 List Of Service Publications
1989/01/01 High Performance Maintenance Free Battery Available
1989/01/01 New Special Instruction Available - "Storage Procedure For Caterpillar Products"
1989/01/01 Remove Fuel From Electronic Control Module (ECM) Before Shipping
1989/01/01 New Screw Used In Brakesaver Water Lines Group
1989/01/01 Correct Timing Specification
1989/01/01 New Head Gasket Available; Head Gasket Replacement Guidelines
1988/12/01 New Mounting Bolts Used In Aftercooler Housings
1988/12/01 Rechargeable Portable Printer Available
1988/12/01 New Camshaft Used; Camshaft Installation Kit Available
1989/02/01 Surface Marks On Roller Bearing Cages Are Not Cracks
1989/03/01 New Features And Enhanced Fault Codes Available In New PEEC Personality Modules
1989/03/01 Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available
1989/03/01 Improved Magnet Used In Rack Assembly
1989/03/01 New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01 Preventive Maintenance For Batteries
1989/04/01 Recommended Wiring For Vehicle Speed Circuit
1989/04/01 Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update
1989/04/01 Low Gear Limits May Be Ignored On 3406B (PEEC) Truck Engines
1989/04/01 Be Sure Electrical Components Are Correctly Grounded
1989/04/01 Requirements For Cooling System Conditioner In 3176 Truck Engines
1989/04/01 Limitations On Engine Cranking Time
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.