1989/01/01 Caterpillar


High Performance Maintenance Free Battery Available

Usage:


A high capacity Group 31 maintenance free battery is now available. The 9X3404 Maintenance Free Battery has 900 cold cranking amps, 165 reserve capacity, and 100 amp-hours.

This new battery was developed for superior cold start performance on any machine using Group 31 batteries. It is a direct replacement for 3T5760, 3T5770, and 3T5780 Original Equipment Batteries. The new battery will start machines at colder temperatures than other Cat maintenance free batteries.

Like other maintenance free batteries, the 9X3404 Maintenance Free Battery should be checked with a digital volt meter for state of charge. Any reading below 12.40 volts means it needs recharging. Refer to Special Instruction SEHS7633, "Battery Test Procedure" for complete test and recharge information.

Caterpillar Information System:

1989/01/01 New Special Instruction Available - "Storage Procedure For Caterpillar Products"
1989/01/01 Remove Fuel From Electronic Control Module (ECM) Before Shipping
1989/01/01 New Screw Used In Brakesaver Water Lines Group
1989/01/01 Correct Timing Specification
1989/01/01 New Head Gasket Available; Head Gasket Replacement Guidelines
1988/12/01 New Mounting Bolts Used In Aftercooler Housings
1988/12/01 Rechargeable Portable Printer Available
1988/12/01 New Camshaft Used; Camshaft Installation Kit Available
1988/12/01 Larger Valve Springs Must Be Used With Williams Blue Ox ® 485 kPa (70 psi) Exhaust Brake; New Spring Compressor Group Available
1988/12/01 Revised Instructions For Installation of New Maintenance Free Batteries
1988/11/01 $25 Rebate For Members Of Caterpillar Truck Engine Owners Club (U.S. Only)
1988/11/01 New Liner Seat Insert Available
1989/01/01 List Of Service Publications
1989/02/01 Troubleshooting 3406B (PEEC) Truck Engines Equipped With Power Demand Cruise Control (PDCC)
1989/02/01 Cold Start Procedures For 3406 (PEEC) Truck Engines
1989/02/01 New Publication Available- "Coolant And Your Engine"
1989/02/01 Surface Marks On Roller Bearing Cages Are Not Cracks
1989/03/01 New Features And Enhanced Fault Codes Available In New PEEC Personality Modules
1989/03/01 Updated 7X1830 SPM For 8T5282 3406B PEEC DDT Available
1989/03/01 Improved Magnet Used In Rack Assembly
1989/03/01 New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01 Preventive Maintenance For Batteries
1989/04/01 Recommended Wiring For Vehicle Speed Circuit
1989/04/01 Owners Of Digital Diagnostic Tools (DDT) And Electronic Control Analyzer Programmers (ECAP) Must Register Their Service Tools To Automatically Receive The Mailing Of The May 1989 Service Program Module (SPM) Update
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.