Balancer Group (Front)
Show/hide table
Illustration 1 | g03318093 |
Show/hide table
Specification for 379-4831 Balancer Gp, and 380-9256 Balancer Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 8M-2530 Bolt | Torque to |
2 | 1 | 4W-4998 Gear Shaft | Diameter is |
3 | 1 | 7N-6983 Bushing | Bore of the bushing after assembly is |
4 | 1 | 101-1365 Thrust Plate | Thickness is |
5 | - | - | For standard rotation (CCW) engines, mark on the balancer gear must be in alignment with the mark on the crankshaft gear. |
Caterpillar Information System:
3500 Engines for Caterpillar Built Generator Sets Vibration Damper Guard
3500B Locomotive Engines Cylinder Head Valves
C27 Generator Set Model View Illustrations
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
3516B Engine Engine Speed/Timing Sensor - Clean/Inspect
3516C Locomotive Engine Fire Prevention and Explosion Prevention
3516B Engine Coolant - Change
3176C and 3196 Marine Engines Fumes Disposal Filter Element - Replace
2013/04/22 New Exhaust Valve Stem Seals and Rotocoils Are Available for Certain 3500B and 3500C Pleasure Craft Engines {1100}
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft Pulley
C1.5 and C2.2 Industrial Engines Engine Oil and Filter - Change
C1.5 and C2.2 Industrial Engines Engine Oil Level - Check
3500B High Displacement Camshaft
3500C Marine Engines Engine Oil Pan
3500B High Displacement Cylinder Block
3508B Industrial Engines Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Engine Oil Filter
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500C Marine Engines Flywheel
3500B and 3500C Marine Engines Engine Mount (Front)
3500B and 3500C Marine Engines Crankcase Breather
3500B and 3500C Marine Engines Crankcase Breather