C27 Generator Set Caterpillar


Model View Illustrations

Usage:

C27 T4Z
The following model views show typical features of the generator sets that are supported in this manual. Due to individual applications, your generator set may appear different from the illustrations.


Illustration 1g03318083

Typical example of a C27 generator set

(1) Emergency stop button

(2) Control panel

(3) Engine control module (ECM)

(4) Oil filler

(5) Oil level gauge

(6) Open crankcase ventilation (OCV) filter

(7) Fuel priming pump

(8) Coolant sample port

(9) Package lifting eye

(10) Secondary starting motor

(11) Fuel inlet

(12) Fuel return

(13) Oil drain

(14) Oil filter

(15) Oil sample port

(16) Water separator

(17) Primary fuel filter

(18) Secondary fuel filter

(19) Radiator cap

(20) Engine lifting eye

(21) Exhaust

(22) Air inlet

(23) Air cleaner

(24) Battery disconnect switch

(25) Primary starting motor

(34) Coolant sampling ports (oil cooler)




Illustration 2g02265021

Right-hand side view of standard enclosure

(26) Access door

(27) Air outlet

(28) Exhaust outlet

(29) Enclosure lifting locations

(30) Oil drain

(31) Fuel inlet/outlet (if equipped)

(32) Air inlet




Illustration 3g02265036

Left-hand side view of standard enclosure

(33) Coolant drain




Illustration 4g03341978

C27 and C32 Optional Enclosure

(1) Air inlet

(2) Coolant fill access

(3) Coolant drain

(4) Ground Fault Circuit Interrupt (GFCI)

(5) Oil drain

(6) Fuel inlet

(7) Fuel outlet

(8) Access doors

(9) Access panel

(10) Louver motor access

(11) Fuel filler

(12) Lifting eyes

(13) Muffler drain access

(14) Muffler access

Caterpillar Information System:

3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
3516B Engine Engine Speed/Timing Sensor - Clean/Inspect
3516C Locomotive Engine Fire Prevention and Explosion Prevention
3516B Engine Coolant - Change
3176C and 3196 Marine Engines Fumes Disposal Filter Element - Replace
2013/04/22 New Exhaust Valve Stem Seals and Rotocoils Are Available for Certain 3500B and 3500C Pleasure Craft Engines {1100}
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft Pulley
C1.5 and C2.2 Industrial Engines Engine Oil and Filter - Change
C1.5 and C2.2 Industrial Engines Engine Oil Level - Check
2012/12/19 A New Fuel Filter Base Assembly Is Used on C175 Generator Set Engines {1261}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
3176C and 3196 Marine Engines Starting the Engine
3500B Locomotive Engines Cylinder Head Valves
3500 Engines for Caterpillar Built Generator Sets Vibration Damper Guard
3500B High Displacement Balancer Group (Front)
3500B High Displacement Camshaft
3500C Marine Engines Engine Oil Pan
3500B High Displacement Cylinder Block
3508B Industrial Engines Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Engine Oil Filter
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500C Marine Engines Flywheel
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.