Air Inlet and Exhaust Lines
Show/hide table
| |
| Illustration 1 | g03318106 |
Show/hide table
| |
| Illustration 2 | g03318107 |
Show/hide table
| Specification for 381-7033 Turbocharger Air Lines Gp, and 424-9786 Air Lines Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 4 | 6V-0973 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 2 | 8 | 6V-3917 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
| 3 | 10 | 9F-2773 Bolt | Use the following procedure in order to assemble the aftercooler assembly and tighten the bolts:
1. Assemble the seals to the aftercooler core. 2. Temporarily secure the bottom seal to the aftercooler with tape. Do not use an adhesive, a silicone lubricant, or any other lubricant for retention of the seal. 3. Assemble the aftercooler with seals to the inlet manifold. 4. Inspect the bottom seal in order to ensure that the seal is seating correctly in the recess. 5. Install the aftercooler cover. 6. Inspect the upper seal in order to ensure that the seal is seating correctly in the recess. 7. Install the cover bolts. Hand tighten the cover bolts. 8. Tighten the bolts in a numerical sequence as shown in Illustration 2 to 9. Again, tighten the bolts in a numerical sequence that is shown in Illustration 2 to 10. Remove the tape. |
| 4 | 12 | 6V-5101 O-Ring Seal | Lubricate the bore lightly with 5P-3975 Rubber Lubricant. |
Caterpillar Information System:
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500 Engines for Caterpillar Built Generator Sets Engine Oil Filter
3508B Industrial Engines Crankcase Breather
3500B High Displacement Cylinder Block
3500C Marine Engines Engine Oil Pan
3500B High Displacement Camshaft
3500B High Displacement Balancer Group (Front)
3500 Engines for Caterpillar Built Generator Sets Vibration Damper Guard
3500B Locomotive Engines Cylinder Head Valves
C27 Generator Set Model View Illustrations
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
3516B Engine Engine Speed/Timing Sensor - Clean/Inspect
3500B High Displacement Air Inlet and Exhaust Lines
3500C Marine Engines Flywheel
3500B and 3500C Marine Engines Engine Mount (Front)
3500B and 3500C Marine Engines Crankcase Breather
3500B and 3500C Marine Engines Crankcase Breather
3500B and 3500C Marine Engines Crankcase Breather
3500B and 3500C Marine Engines Exhaust Manifold
3500C Marine Engines Exhaust Manifold
MT4400D AC Off-Highway Truck Engine Oil and Filter - Change
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Coolant Temperature Is Low
3516B Engine Fuel System - Prime
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Engine Misfires, Runs Rough or Is Unstable