Gear Group (Rear)
Show/hide table
Illustration 1 | g03245696 |
Show/hide table
Specification for 382-4493 Rear Gear Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 101-1369 Camshaft Drive Gear | Before assembly, clean the taper of the camshaft and the tapered bore of the camshaft drive gear with lint free cloth saturated with cleaning solvent to remove excess oil. Clean with alcohol wipe. |
2 | 2 | 101-1364 Idler Gear As | After installation, bore of 125-9751 Bushing is Installation depth of the bushing is |
3 | 1 | 101-1363 Balancer Gear Assembly | After installation, bore of 101-1372 Bushing is Installation depth of the bushing is |
4 | 2 | 101-1368 Thrust Washer | Thickness is |
5 | 1 | 101-1366 Gear Shaft | Diameter is |
6 | 4 | 8M-2530 Bolt | Torque to |
Show/hide table
Illustration 2 | g03245697 |
Rear view |
Show/hide table
Item | Qty | Part | Specification Description |
7 | 4 | 1B-4367 Bolt | Torque to |
8 | 2 | 8S-2331 Bolt | Torque to |
9 | 2 | 101-1367 Idler Shaft | Diameter is |
10 | 1 | 101-1365 Thrust Plate | Thickness is |
Caterpillar Information System:
G3516C and G3516E Gas Engines Water Lines
3508B Industrial Engines Crankshaft
G3516C and G3516E Gas Engines Water Lines
3508B Industrial Engines Cylinder Block
C175-16 Engine Fuel Filter Is Restricted
2012/09/21 Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
3500C Locomotive Engines Coolant Temperature Regulator - Replace
3500C Locomotive Engines Coolant Sample (Level 2) - Obtain
3500C Locomotive Engines Coolant Sample (Level 1) - Obtain
3500C Locomotive Engines Coolant Level - Check
C13, C15, and C18 Tier 4 Final Engines Exhaust System Contains Fuel
3500C Locomotive Engines Coolant Extender (ELC) - Add
G3516C and G3516E Gas Engines Water Lines
2012/10/22 New Jacket Water Heater System Components are Used on Certain G3500 Engines {1383}
3512E Tier 4 Final Engines for Land Electric Drilling Engine Oil Pump
3516C Locomotive Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
390F Excavator Boom/Stick/Bucket Combinations
C18 Marine Auxiliary and Marine Generator Set Engines Diagnostic Trouble Code Cross Reference
3500 Engines Air Starting Motor
C18 Marine Auxiliary and Marine Generator Set Engines Engine Does Not Crank
Three60 Precision Controller Gen II Thruster Pipe - Inspect/Replace
C175-16 Engine Fuel Flow Is High
3500 Industrial Engines Thermocouple
2013/06/19 A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}