Engine Oil Pump
Show/hide table
Illustration 1 | g03834781 |
Show/hide table
Specification for 245-6771 Engine Oil Pump Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
Before you install the pump, lubricate the moving parts with clean engine oil. Rotate the pump by hand in order to ensure that the pump rotates freely. | |||
1 | 1 | 2S-2760 Spring | Length under test force is Test force is Approximate free length after test is |
Show/hide table
Illustration 2 | g03834782 |
Section A-A |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
C | 3 | 7N-5052 Gear | Length is Depth of the bore in the oil pump body for the new gear is |
D | 2 | 7W-1017 Shaft | Diameter is After assembly, bore in the 7W-0060 Bushing for the new shaft assembly is |
E | 2 | 4M-3248 Hollow Dowel | Extension from the oil pump cover is |
F | - | - | Distance from the end of the idler shaft to the gear face is |
G | 1 | 7N-5058 Pump Drive Shaft | Diameter is After assembly, bore in the 7W-0060 Bushing for the new shaft assembly is |
H | - | - | Distance from the end of the shaft to the gear face is |
J | 1 | 7W-0050 Pump Cover | Installation depth of 7W-0060 Bushing in the pump cover is |
K | 1 | 4P-5637 Oil Pump Body As | Installation depth of 7W-0060 Bushing in the oil pump body assembly is |
Show/hide table
Illustration 3 | g03834783 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
L | 2 | 7N-2043 Dowel | Extension from the 1N-4637 Pump Cover is |
Show/hide table
Illustration 4 | g03834784 |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
M | - | - | Position of 7W-0060 Bushing joints from the centerline through the bearing bores is 45 ± 15 degrees. |
Caterpillar Information System:
2012/10/22 New Jacket Water Heater System Components are Used on Certain G3500 Engines {1383}
G3516C and G3516E Gas Engines Water Lines
3508B Industrial Engines Gear Group (Rear)
G3516C and G3516E Gas Engines Water Lines
3508B Industrial Engines Crankshaft
G3516C and G3516E Gas Engines Water Lines
3508B Industrial Engines Cylinder Block
C175-16 Engine Fuel Filter Is Restricted
2012/09/21 Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
3500C Locomotive Engines Coolant Temperature Regulator - Replace
3500C Locomotive Engines Coolant Sample (Level 2) - Obtain
3500C Locomotive Engines Coolant Sample (Level 1) - Obtain
3516C Locomotive Engine Cooling System Supplemental Coolant Additive (SCA) - Test/Add
390F Excavator Boom/Stick/Bucket Combinations
C18 Marine Auxiliary and Marine Generator Set Engines Diagnostic Trouble Code Cross Reference
3500 Engines Air Starting Motor
C18 Marine Auxiliary and Marine Generator Set Engines Engine Does Not Crank
Three60 Precision Controller Gen II Thruster Pipe - Inspect/Replace
C175-16 Engine Fuel Flow Is High
3500 Industrial Engines Thermocouple
2013/06/19 A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
G3516C and G3516E Gas Engines Turbocharger
2013/06/18 A New Improved Cam Gear Is Now Available for Certain Engines {1212}
C175-16 Engine Fuel Pressure Is High - Fuel Supply System