Usage:
3306 Truck Engines
- SUPPLEMENT: 11/00/87
TRUCK ENGINE NEWS, SEPTEMBER 1987, PAGE 7, "Single Lip Hydrodynamic Seal Used In Water Pumps" on 3306, 3306B Truck Engines. In Step 2, cross out "impeller" and replace it with "drive gear".
--------------- END SUPPLEMENT ---------------
Description of Change: A new single lip seal with hydrodynamic grooves is used in the water pump on 3306 Truck Engines. The hydrodynamic grooves are on the new seal lip, and force any oil back into the engine as the seal and shaft rotate. See illustration.
New seal design used in the water pump on 3306 Truck Engines.
Adaptable To: The new 8C5210 Seal can be used as a direct replacement for the former 8T5919 Seal Group which is still serviced for other applications. Part number of the 2W8002 Water Pump Group did not change.
When the new seal is installed, do the following:
1. Install the seal DRY, and do NOT put oil on the shaft.
2. Put the lip toward the pump impeller so the grooves will direct the oil toward the engine.
3. Replace the 4N5834 Filter in the weep hole every time a new seal is installed.