Usage:
3406B (PEEC) Engines
- SUPPLEMENT: 07/00/88
TRUCK ENGINE NEWS, SEPTEMBER 1987, PAGE 5, "New 8T8726, 8T8694 And 8T8695 Adapter Cable Assemblies Available " for 3406B (PEEC) Engines. In the illustration, the part number, 8T9695, is not correct. The correct part number is 8T8695.
--------------- END SUPPLEMENT ---------------
The new 8T8726 (3-pin breakout), 8T8694 (5-pin breakout) and 8T8695 (9-pin breakout) Adapter Cable Assemblies are available to help service 3406B (PEEC) Engines. These three cable assemblies will provide test points for the individual wires in the wiring harness used for the PEEC System. This will facilitate troubleshooting of the PEEC System. The cable assemblies are essentially "T" cables with individual tip jacks on the pigtail portion of the cables. The cable assemblies may be inserted into the PEEC System wiring harness at connector locations. The individual tip jacks on the pigtails are labeled the same as the wires to which they are connected in the PEEC System wiring harness. Standard probe tips, such as those used on multimeter leads, can be inserted into the tip jacks.
NOTE: The 8T8726 Adapter Cable Assembly (3-pin breakout) is included in the 8T5282 PEEC Digital Diagnostic Tool Group.
Adapter cable assemblies.