New Hydraulic Steering Mounting Group Available
Usage:
3208 Truck Engines (32Y, 40S, 51Z, 2Z)
Description of Change: A new hydraulic steering mounting group is available for use on 3208 Truck Engines. This new mounting group is necessary because the manufacturer of the power steering pump has discontinued the former model "B" pump. They have replaced it with the model "BB " pump. The model "BB" pump requires a different mounting group than the model "B" pump.
Adaptable As: The new 7C7717 Hydraulic Steering Mounting Group is available to mount the model "BB" pump on 3208 Truck Engines. The components of the new 7C7717 Hydraulic Steering Mounting Group are shown in the illustration and identified in the chart.
Location of components in the new 7C7717 Hydraulic Steering Mounting Group.
Caterpillar Information System:
1987/09/01 New Alternator Group Used In Charging Alternator Groups
1987/09/01 Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01 Single Lip Hydrodynamic Seal Used In Water Pumps
1987/09/01 Dynamic Timing Charts Available For Most Popular 3208 And 3406 Truck Engine Ratings
1987/09/01 New Piston Cooling Jets Used
1987/09/01 New 8T8726, 8T8694 And 8T8695 Adapter Cable Assemblies Available
1987/09/01 New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available
1987/09/01 New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available
1987/09/01 Mid-Life Bearing Maintenance Recommendations
1987/09/01 Recommendations For Preventing Cooling System Damage
1987/09/01 New Turbochargers Have Several Improvements
1987/08/01 Remanufactured Turbocharger Groups And Cartridges
1987/09/01 Remanufactured 3208T Economy Truck Engine Available
1987/09/01 Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01 Improved Warranty For Remanufactured Parts And Components
1987/10/01 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01 New Special Instruction, "using The PEEC Screen Map(s) "
1987/10/01 Either Type Sleeve Satisfactory For Governor Servo Piston
1987/10/01 Check Plastic Water Sleeve If Engine Experience Severe Overheating
1987/10/01 Caterpillar Announces Ambassador Club For Dealer Personnel In The U.S.
1987/11/01 New Service Tools Available
1987/11/01 New Air Powered Scraper Available For Gasket Removal
1987/11/01 New 8C9705 12 Volt Converter Available To Power The 8T8697 Electronic Control Analyzer Programmer ECAP)
1987/11/01 Improved Mounting Hardware For Electronic Control Group