1987/09/01 Caterpillar


Remanufactured 3208T Economy Truck Engine Available

Usage:


A Remanufactured 3208T Economy Engine is available from Caterpillar. The Remanufactured 3208T Economy Engine is rated at 160 kW (215 hp) at 2200 rpm. This engine is adaptable to most 49 state applications where an economy 3208T Engine [160 kW (215 hp) at 2200 rpm or 150 kW (200 hp) at 2000 rpm] was originally used.

Caterpillar Remanufactured Engines undergo strict quality control checks throughout the remanufacturing process. Each one is dynamometer checked, just like a new engine. All remanufactured engines receive the latest critical product updates to ensure that they provide "like new performance." Every cylinder block is either sleeved for standard pistons, or is a new block. With a nationwide warranty of 12 months or 40,000 km (25,000 miles), the Remanufactured 3208T Economy Engine is another value priced repair option available from Caterpillar.

The part number of the Remanufactured 3208T Economy Engine is 0R1155 . The 0R1155 Remanufactured 3208T Economy Engine can be used to replace the following truck engine arrangements:

NOTE: The 0R1155 Remanufactured 3208T Economy Engine is built to the 7W2911 Engine Arrangement.

Caterpillar Information System:

1987/09/01 New Hydraulic Steering Mounting Group Available
1987/09/01 New Alternator Group Used In Charging Alternator Groups
1987/09/01 Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01 Single Lip Hydrodynamic Seal Used In Water Pumps
1987/09/01 Dynamic Timing Charts Available For Most Popular 3208 And 3406 Truck Engine Ratings
1987/09/01 New Piston Cooling Jets Used
1987/09/01 New 8T8726, 8T8694 And 8T8695 Adapter Cable Assemblies Available
1987/09/01 New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available
1987/09/01 New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available
1987/09/01 Mid-Life Bearing Maintenance Recommendations
1987/09/01 Recommendations For Preventing Cooling System Damage
1987/09/01 New Turbochargers Have Several Improvements
1987/09/01 Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01 Improved Warranty For Remanufactured Parts And Components
1987/10/01 New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01 New Special Instruction, "using The PEEC Screen Map(s) "
1987/10/01 Either Type Sleeve Satisfactory For Governor Servo Piston
1987/10/01 Check Plastic Water Sleeve If Engine Experience Severe Overheating
1987/10/01 Caterpillar Announces Ambassador Club For Dealer Personnel In The U.S.
1987/11/01 New Service Tools Available
1987/11/01 New Air Powered Scraper Available For Gasket Removal
1987/11/01 New 8C9705 12 Volt Converter Available To Power The 8T8697 Electronic Control Analyzer Programmer ECAP)
1987/11/01 Improved Mounting Hardware For Electronic Control Group
1987/11/01 Ring Retainer And New O-Ring Seal Used In The Brakesaver Engine Oil Lines Group
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.