1987/08/01 Caterpillar


New Performance Analysis Report (PAR) Brochure And Directory Of Par Dealers Available

Usage:


All Caterpillar Truck Engines

"Is Your Truck Engine Performing Up To PAR?" , is the title of a new customer brochure for the Performance Analysis Report program. This brochure is available to dealers in packages of 50 by ordering Form PEDP0026. This customer brochure points out how PAR is more than just a chassis dyno test. The brochure discusses the primary factors by which truck engine performance will be evaluated and how wheel horsepower will be used. It also points out that truck specifications and driving technique affect vehicle performance.

A new directory of PAR dealers is also available. Dealers can order Form LEDT4211 for a package of 25. The directory uses the same format as the Truck Engine Parts and Service Directory with shop hours, after hours phone numbers and directions to authorized PAR locations in North America.

Caterpillar Information System:

1987/08/01 Fuel Heaters Should Be Thermostatically Controlled Or Self-Regulated
1987/08/01 Temperature Regulator Housing Parts And Water Pump Adapter Have More Resistance To Erosion And Galvanic Corrosion; Guidelines On Grounding Of Electrical System And Cooling System Maintenance
1987/07/01 Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01 Silicone Rubber Water Seals Available
1987/07/01 High Alloy Cylinder Head Improved
1987/07/01 New Water Pump Group Used
1987/07/01 Recommendations For Reusability Of Pistons With Crater Rim Cracks
1987/07/01 Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01 New Engines Rated @ 160 kW (210 hp) @ 2600 rpm Must Be Rerated When Used To Replace 2800 rpm Engines
1987/06/01 Remanufactured Programmable Electronic Engine Controls (PEEC)
1987/06/01 Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01 All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing
1987/08/01 New Service Tools Available
1987/08/01 Another Gauge Group Available To Check For Excessive Wear In Turbocharger Seal Ring Grooves
1987/08/01 List Of Service Publications
1987/08/01 Remanufactured Turbocharger Groups And Cartridges
1987/09/01 New Turbochargers Have Several Improvements
1987/09/01 Recommendations For Preventing Cooling System Damage
1987/09/01 Mid-Life Bearing Maintenance Recommendations
1987/09/01 New 8T5282 Programmable Electronic Engine Control Digital Diagnostic Tool Group (PEEC DDT) Available
1987/09/01 New 8T8697 Electronic Control Analyzer Programmer (ECAP), 8C5919 Electronic (ECAP PEEC) Conversion Group and 8T5275 Adapter Cable Assembly (T-Harness Cable) Available
1987/09/01 New 8T8726, 8T8694 And 8T8695 Adapter Cable Assemblies Available
1987/09/01 New Piston Cooling Jets Used
1987/09/01 Dynamic Timing Charts Available For Most Popular 3208 And 3406 Truck Engine Ratings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.