Exhaust Bypass Valve
Show/hide table
| |
| Illustration 1 | g03022676 |
|
Typical example | |
Show/hide table
| Specification for 378-8896 Exhaust Bypass and 397-5173 Exhaust Bypass | |||
| Item | Qty | Part | Specification description |
| 1 | 4 | 5M-1719 Taperlock Stud | Torque to |
| 2 | 4 | 168-7800 Locknut | Clean the taperlock stud, the locknut, and the base of the locknut prior to assembly. |
| Use the following procedure to tighten the locknut:
1. Tighten two diagonal locknuts to 2. Tighten the remaining locknuts to 3. Again, torque all four locknuts to |
|||
Show/hide table
| |
| Illustration 2 | g03022677 |
|
Typical example | |
Show/hide table
| Specification for 378-8896 Exhaust Bypass and 397-5173 Exhaust Bypass | |||
| Item | Qty | Part | Specification description |
| 3 | 1 | 6V-8186 Full Nut | Torque to |
| 4 | 1 | 259-1434 Spring | Free length is |
| 5 | 1 | 259-1435 Spring | Free length is |
| 6 | 1 | 6V-8801 Nut | Torque to |
| 7 | 1 | 343-9109 Setscrew | Before assembly, apply Loctite C5A Copper anti-seize to the threads and the bearing surfaces. |
| 8 | 5 | 7C-9721 Screw | Torque to |
Caterpillar Information System:
3512C and 3516C Marine Engines Air Cleaner
G3516C and G3516E Gas Engines Gear Group (Front)
3512C and 3516C Marine Engines Air Cleaner
3500C Marine Engines Cylinder Block
G3500 Engines Camshaft Bearing Position
WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348} WAVS Generic Installation Guide for Certain Cat® Products{7347, 7348}
2012/05/02 New Transmission Software is Available for Certain CX31 Transmissions and Certain CT660 On-Highway Trucks {7620}
C175-16 Engine Aftercooler Core - Inspect/Clean
C175-16 Engine Fuel Tank Water and Sediment - Drain
C175-16 Engine Emergency Stopping
C175-16 Locomotive Engines Safety Messages
2012/08/28 A New Power Distribution Box and Disconnect Switch Is Used on C175-16 Generator Set Engines {1417, 1420, 4461}
3500C Marine Engines Alternator Mounting
G3500 Engines Gear Group (Front)
2012/05/14 New Commissioning Instructions Now Used to Ensure Correct Voltage Applied to Contactor on 3406C, C15, C18, and C9 Gen Sets {1435, 7332, 7400}
2012/05/16 A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
2012/05/10 A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/09 A New Improved Seal Is Now Used in the Reman Water Pumps of Certain Engines {1000, 1361, 7555}
3512C and 3516C Marine Engines Air Inlet and Exhaust Lines
2012/05/08 Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2014/10/10 Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
C7.1-XQ200 Rental Generator Set Additional Messages
C15 Petroleum Engines Engine Operation
C15 Petroleum Engines Manual Stop Procedure