Cat dealers need the information from the serial number and information plate in order to determine the components that were included with the engine. This information permits accurate identification of replacement part numbers.
| |
| Illustration 1 | g02616020 |
The serial number plate (1) is on the left side of the cylinder block near the rear of the engine.
The following information is stamped on the serial number plate: engine serial number, model and arrangement number.
| |
| Illustration 2 | g02616021 |
The information plate (2) is on the left side top surface of the cylinder block in front of the front cylinder head.
The following information is stamped on the information plate: maximum altitude of the engine, horsepower, high idle, full load rpm, fuel settings and other information.
Identification of the Generator Set
| |
| Illustration 3 | g02616022 |
The identification plate (3) for the generator set is located on the right side of the barrel of the generator.
When service is required, the information that is given on this plate should be used. The identification plate for the generator set includes the following information: serial number, model number and the rating of the generator set. The generator set consists of the engine and the generator. All pertinent generator data is also included on the plate in order to provide the information that is necessary to order parts.
Serial Number Plate for the Generator
| |
| Illustration 4 | g02616024 |
The serial number plate (4) for the generator is located on the left side of the front of the generator.
All generator lead wiring information can be found on a decal that is located on the side panel of the generator terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.