Cylinder Head
Show/hide table
Illustration 1 | g03322736 |
Show/hide table
Specification for 350-4386 Cylinder Head Gp | |||
Item | Qty | Part | Specification Description |
1 | 2 | 130-2607 Valve Seat Insert | During installation, shrunk the valve seat insert and ress the insert into the cylinder heads counterbore. |
2 | 2 | 130-2608 Valve Seat Insert | During installation, shrunk the valve seat insert and ress the insert into the cylinder heads counterbore. |
3 | 5 | 3B-0645 Cup Plug | Before installation, apply Loctite 11358 to the bores for the cup plugs. |
4 | 1 | 3B-0623 Cup Plug | Before installation, apply Loctite 11358 to the bores for the cup plugs. |
5 | 2 | 3B-0623 Cup Plug | Before installation, apply Loctite 11358 to the bores for the cup plugs.
Installation depth (D) for cup plug is |
6 | 2 | 3B-0623 Cup Plug | Before installation, apply Loctite 11358 to the bores for the cup plugs.
Installation depth (E) for cup plug is |
The cylinder head bolt tightening procedure depends on which cylinder head gasket is used. Refer to one of the following bolt tightening procedures based on your cylinder head gasket.
Bolt Tightening with the 362-8264 Cylinder Head Gasket
Show/hide table
Illustration 2 | g03322738 |
Show/hide table
Item | Qty | Part | Specification Description |
7 | 1 | 5B-7890 Pipe Plug | Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize. |
8 | 6 | 131-0420 Cylinder Head Fastener Gp | Use the following procedure in order to tighten the bolts for the cylinder head: Refer to Illustration 2 for cylinder head bolt tightening sequence. 1. Before assembly, apply clean engine oil to the threads of the bolts. 2. Tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 3. Again, tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 4. Again, tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 5. Loosen bolt 1 through bolt 8 in the numerical sequence for an angle of 90 ± 5 degrees. 6. Again, tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 7. Tighten two bolts (10) only after bolt 1 through bolt 8 have been given the final torque. 8. Tighten two bolts (10) to |
9 | 2 | 131-0421 Cylinder Head Fastener Gp | |
10 | 2 | 5B-0213 Bolt |
Bolt Tightening with the 110-6991 Cylinder Head Gasket
Show/hide table
Illustration 3 | g03322739 |
Show/hide table
Item | Qty | Part | Specification Description |
7 | 1 | 5B-7890 Pipe Plug | Before assembly, lubricate the threads of the pipe plug with Loctite C5A Copper Anti-Seize. |
8 | 6 | 131-0420 Cylinder Head Fastener Gp | Use the following procedure in order to tighten the bolts for the cylinder head: Refer to Illustration 3 for cylinder head bolt tightening sequence. 1. Before assembly, apply clean engine oil to the threads of the bolts. 2. Tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 3. Again, tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 4. Again, tighten bolt 1 through bolt 8 in the numerical sequence to a torque of 5. Turn bolt 1 through bolt 8 in the numerical sequence to an angle of 180 ± 5 degrees. 6. Tighten two bolts (10) only after bolt 1 through bolt 8 have been given the final torque. 7. Tighten two bolts (10) to |
9 | 2 | 131-0421 Cylinder Head Fastener Gp | |
10 | 2 | 5B-0213 Bolt |
Caterpillar Information System:
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Top mounted Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Side mounted Turbocharger
C4.4 Industrial Engine Exhaust Cooler (NRS) - Remove and Install - Twin Turbocharger
3516C Generator Sets Refill Capacities
C32 Marine Generator Set Safety Messages
3516C Generator Sets Product Lifting
C175-16 Marine Propulsion Engines Engine Overspeed Verification Test
349F and 352F Excavators Machine System Specifications Front Lines - Medium Pressure
3516C Generator Sets Plate Locations and Film Locations
2011/07/01 A New Clamp Is Used on the Exhaust Manifold for G3500C and G3500E Generator Set Engines {1059, 7553}
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Aftercooler Coolant Temperature Sensor
C15 Generator Sets Sensors and Electrical Components
C13, C15, and C18 Tier 4 Final Engines Speed/Timing Sensor
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Cylinder Block
3512C Oil Well Service Engines Crankshaft Vibration Damper - Inspect
3516C Generator Sets Fluid Recommendations
3516C Generator Sets Product Description
C4.4 Generator Sets Battery Information
3406C Industrial Engine Belts - Inspect/Adjust/Replace
G3304B and G3306B Engines Fan Drive
C15 Generator Sets General Hazard Information
C4.4 Generator Sets Burn Prevention
C15 Generator Sets Fire Prevention and Explosion Prevention
C4.4 Generator Sets Electrical System