Flywheel Housing
Show/hide table
| |
| 图 1 | g02562898 |
Show/hide table
| |
| 图 2 | g02562899 |
|
螺栓拧紧顺序 | |
Show/hide table
| 223-4738 飞轮壳体总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 在安装飞轮壳体之前，检查飞轮壳体的前表面和缸体的后表面。 这些部件必须没有以下物质：机油、燃油、水、密封垫粘合剂、组装固定胶和任何其他异物。 | |||
| 要密封飞轮壳体与缸体之间的接合处，向飞轮壳体的配合面上涂覆超蓝 Loctite 587。 | |||
| 按照以下步骤拧紧飞轮壳体螺栓： | |||
| 1 | 9 | 5J-5793 螺栓 | 1. 按照图 2 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 2. 按照图 2 中所示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 3. 再次按照图 2 中所示的数字顺序将螺栓 1 至 9 拧紧至扭矩为 4. 再次按照图 2 中所示的数字顺序将螺栓 10 至 24 拧紧至扭矩为 |
| 2 | 5 | 165-3931 螺栓 | |
| 3 | 9 | 165-3929 螺栓 | |
| 4 | 1 | 165-3925 螺栓 | |
| 5 | 2 | 1P-1669 密封塞 | 拧紧至扭矩为 |
Caterpillar Information System:
The 170-1186 Pipe Fitting in the Fuel Lines on G3606 and G3608 Engines May Leak{1259, 1274, 1704} The 170-1186 Pipe Fitting in the Fuel Lines on G3606 and G3608 Engines May Leak{1259, 1274, 1704}
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Outlet Pressure Sensor
349F and 352F Excavators Machine System Specifications Main Hydraulic Pump Mounting
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Turbocharger Inlet Pressure Sensor
C9.3 Engines for Caterpillar Built Machines Engine Oil Level Sensor
C3.4B Engines For Caterpillar Built Machines Starter Motor
3500B Engines for Caterpillar Built Power Modules Connecting Rod and Main Bearing Journals
C15 Generator Sets Circuit Breakers - Reset
C15 Generator Sets Voltage Regulators
C15 Generator Sets Refill Capacities and Recommendations
CD44B and CD54B Vibratory Asphalt Compactors Fuel Tank Strainer - Clean
3512E Land Electric Drive Monitoring System
C9 Generator Set Refill Capacities
3516C Generator Sets Model View Illustrations
Proactive Updates of the Auxiliary Cooling System Piping are not Recommended on Certain Commercial Engines{1355, 1380, 1393} Proactive Updates of the Auxiliary Cooling System Piping are not Recommended on Certain Commercial Engines{1355, 1380, 1393}
3516C Generator Sets Safety Messages
C15 Generator Sets Sensors and Electrical Components
3516B and 3516B High Displacement Engines for 994D and 994F Wheel Loaders Aftercooler Coolant Temperature Sensor
2011/07/01 A New Clamp Is Used on the Exhaust Manifold for G3500C and G3500E Generator Set Engines {1059, 7553}
3516C Generator Sets Plate Locations and Film Locations
349F and 352F Excavators Machine System Specifications Front Lines - Medium Pressure
C175-16 Marine Propulsion Engines Engine Overspeed Verification Test
3516C Generator Sets Product Lifting
C32 Marine Generator Set Safety Messages