C175-16 Petroleum Generator Set Engines Caterpillar


Refill Capacities

Usage:

C175-16 P5P

润滑剂容量

发动机润滑系统的容量包括工厂安装的机油滤清器的容量。 辅助机油滤清器系统(如有配备)需要更多的机油。 参考由辅助机油滤清器系统 OEM 提供的技术规格。

表 1
C175-16 发动机机油加注容量(15 度倾斜配置) 
加注时更换滤清器  946.3 L (250 US gal) 
加注时不更换滤清器  927.4 L (245 US gal) 
"添加"和"满"标记之间的容量  176.4 L (46.6 US gal) 

表 2
C175-16 发动机机油加注容量(25 度倾斜配置) 
加注时更换滤清器  586.3 L (154.9 US gal) 
加注时不更换滤清器  567.4 L (149.9 US gal) 
"添加"和"满"标记之间的容量  117.3 L (31 US gal) 

冷却液容量

为了正确保养冷却系统,必须确定冷却系统总容量。 冷却系统的总容量将随安装的设备不同而变化。 冷却系统的总容量可包括以下部件:发动机、膨胀箱、热交换器、散热器、船冷却器和管道。

参考由 Caterpillar或安装设备的原始设备制造商(OEM)提供的规范。 在下列表格中记录冷却系统的总容量。

表 3
C175-16 加注容量 
冷却系统  容量 
水套水  305 L (80.5 US gal) 
独立回路后冷式  82 L (21.6 US gal) 

Caterpillar Information System:

C15 Petroleum Engines Fuel System - Prime
UPSB505 Uninterruptible Power Supply Return to Normal Operation
C15 Petroleum Engines Diagnostic Trouble Codes
2011/03/11 Some Condensation May Be Noticed in the Crankcase of Tier 4 Engines {1000}
UPSB505 Uninterruptible Power Supply External Bypass Connection
C13 Industrial Engine Starting with Jump Start Cables - Do Not Use This Procedure in Hazardous Locations that have Explosive Atmospheres
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Remove
C6.6 Industrial Engine Exhaust Manifold and Turbocharger - Install
C13 Industrial Engine Engine Rating Definitions
CX31 On-Highway Transmission Pump Drive - Assemble
C13 Industrial Engine Reference Material
CX31 On-Highway Transmission Pump Drive - Disassemble
C175-16 Marine Engines Fluid Recommendations
C15 Petroleum Engines Starting Motor - Inspect
C15 Petroleum Engines Turbocharger - Inspect
C175-16 Marine Engines Control Panel
C15 Petroleum Engines Plate Locations and Film Locations
2011/04/08 A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Engines {1302, 7555}
2011/04/08 A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Machine Engines {1302, 7555}
UPSB505 Uninterruptible Power Supply Static Switch Maintenance Connection
Procedure for Fabricating New Clean Gas Induction (CGI) Lines on Certain C15 Truck Engines{1071} Procedure for Fabricating New Clean Gas Induction (CGI) Lines on Certain C15 Truck Engines{1071}
C15 Petroleum Engines Engine Oil Pan - Remove and Install
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System E-Ceiling and Cab Avoidance - Troubleshoot
UPSB505 Uninterruptible Power Supply Auxiliary Connection
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.