Oil Filter and Base (Power Train) - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove housing (3), filter element (2), and O-ring seal (1).
Show/hide table
Illustration 2 g02391643 - Remove bolts (4), base assembly (5), O-ring seals (6), and fittings (7).
Show/hide table
Illustration 1 | g02391639 |
- Install fittings (7). Tighten fittings (7) to a torque of
24 ± 2.5 N·m (18 ± 2 lb ft) . - Install O-ring seals (6), base assembly (5), and bolts (4). Tighten bolts (9) to a torque of
55 ± 10 N·m (41 ± 7 lb ft) .Show/hide tableIllustration 4 g02391639 - Install O-ring seal (1), filter element (2), and housing (3). Tighten housing (3) to a torque of
55 ± 5 N·m (41 ± 4 lb ft) .Note: Do not use an air wrench to tighten housing (3).
Show/hide table
Illustration 3 | g02391643 |
Caterpillar Information System:
Reconditioning Dimensions for Track Rollers {4154, 4180} Reconditioning Dimensions for Track Rollers {4154, 4180}
3512C Oil Well Service Engines System Pressure Release
CG137-08 and CG137-12 Industrial Engines Ignition Transformer
3512C Oil Well Service Engines Model View Illustrations
CX31 On-Highway Transmission Torque Converter - Install
CX31 On-Highway Transmission Torque Converter - Remove
3512C Oil Well Service Engines Reference Material
C32 Petroleum Generator Sets Product Storage
Diesel Particulate Filter (DPF) Maintenance on Certain Products Equipped with a Diesel Particulate Filter (DPF) {108F} Diesel Particulate Filter (DPF) Maintenance on Certain Products Equipped with a Diesel Particulate Filter (DPF) {108F}
349F and 352F Excavators Machine System Specifications Fuel Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Speed Sensor (Transmission Output)
3500 Generator Sets Rotating Rectifier - Check
Carrier Roller Disassembly and Assembly Procedures {4154} Carrier Roller Disassembly and Assembly Procedures {4154}
3512C Oil Well Service Engines Coolant (DEAC) - Change
3512C Oil Well Service Engines Coolant (ELC) - Change
3512C Oil Well Service Engines Reference Information
349F and 352F Excavators Machine System Specifications Cooling Lines
CG137-08 and CG137-12 Industrial Engines Ignition Primary - Test
C15 Generator Sets Turbocharger - Inspect
3512C Oil Well Service Engines Fuel Filter Differential Pressure - Check
CX31 On-Highway Transmission Speed Sensor (Transmission) - Remove
CX31 On-Highway Transmission Speed Sensor (Transmission) - Install
CX31 On-Highway Transmission Gear Pump (Torque Converter and Transmission) - Remove
CX31 On-Highway Transmission Gear Pump (Torque Converter and Transmission) - Install