Torque Converter - Remove
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 350-4401     | Adapter Plate     | 1     |
B     | 4-34614     | Hoist Ring Columbus McKinnon Corporation     |
2     |
C     | 1U-9200     | Lever Puller Hoist     | 1     |
D     | 1U-5750     | Engine Stand     | 1     |
1P-2850 | Oil Drain Cart     | 1     | |
E     | 138-7575     | Link Bracket     | 3     |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products. Dispose of all fluids according to local regulations and mandates. |
- Remove bracket (1) .
Show/hide table
Illustration 1 | g02453418 |
- Install Tooling (A) onto the transmission housing.
Show/hide table
Illustration 2 | g02377316 |
- Use Tooling (B), Tooling (C), and a suitable lifting device in order to install transmission and torque converter (2) onto Tooling (D). The weight of transmission and torque converter (2) is approximately 544 kg (1200 lb). The weight of transmission and torque converter (2) with a retarder is approximately 590 kg (1300 lb).
Note: Three 1/2-20 bolts and one 3/8-24 bolt are required to mount the transmission to Tooling (D) .
Show/hide table
Illustration 3 | g02453432 |
Show/hide table
Illustration 4 | g02453439 |
Show/hide table
Illustration 5 | g02453443 |
- Use Tooling (D) in order to position the transmission vertically.
- Remove plug (3) and the O-ring seal. Remove bolt (4) .
Show/hide table
Illustration 6 | g02453445 |
Show/hide table
Illustration 7 | g02453449 |
- Attach Tooling (E) and a suitable lifting device to torque converter (5). The weight of torque converter (5) is approximately 125 kg (275 lb). Remove torque converter (5) .
Show/hide table
Illustration 8 | g02453450 |
Caterpillar Information System:
3512C Oil Well Service Engines Reference Material
C32 Petroleum Generator Sets Product Storage
Diesel Particulate Filter (DPF) Maintenance on Certain Products Equipped with a Diesel Particulate Filter (DPF) {108F} Diesel Particulate Filter (DPF) Maintenance on Certain Products Equipped with a Diesel Particulate Filter (DPF) {108F}
349F and 352F Excavators Machine System Specifications Fuel Tank
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Speed Sensor (Transmission Output)
3500 Generator Sets Rotating Rectifier - Check
G3406 and G3412 Generator Sets Generator Bearing Temperature - Test/Record
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057} Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
C32 Generator Set Generator Operation
Procedure for Installation of VR6 Voltage Regulator{4467} Procedure for Installation of VR6 Voltage Regulator{4467}
Facility and Equipment Layouts {4150} Facility and Equipment Layouts {4150}
3512E Tier 4 Final Engines for Land Electric Drilling Engine Design
CX31 On-Highway Transmission Torque Converter - Install
3512C Oil Well Service Engines Model View Illustrations
CG137-08 and CG137-12 Industrial Engines Ignition Transformer
3512C Oil Well Service Engines System Pressure Release
Reconditioning Dimensions for Track Rollers {4154, 4180} Reconditioning Dimensions for Track Rollers {4154, 4180}
CX31 On-Highway Transmission Oil Filter and Base (Power Train) - Remove and Install
Carrier Roller Disassembly and Assembly Procedures {4154} Carrier Roller Disassembly and Assembly Procedures {4154}
3512C Oil Well Service Engines Coolant (DEAC) - Change
3512C Oil Well Service Engines Coolant (ELC) - Change
3512C Oil Well Service Engines Reference Information
349F and 352F Excavators Machine System Specifications Cooling Lines
CG137-08 and CG137-12 Industrial Engines Ignition Primary - Test