CX28 On-Highway Transmission Caterpillar


Breather (Transmission) - Clean

Usage:

CX28 TBB



Illustration 1g02352483

  1. Remove breather (1) .

  1. Wash the breather in a clean, nonflammable solvent. Allow the breather to air dry.

  1. Install the breather. Tighten to 35 ± 3 N·m (26 ± 2 lb ft).

Caterpillar Information System:

3512B and 3512C Petroleum Generator Set Engines Customer Specified Parameters Worksheet
CG137-08 and CG137-12 Industrial Engines System Configuration Parameters
3516B Marine Auxiliary Engine Configuration Parameters
C15 and C18 Engines Fuel System Secondary Filter - Replace
C27 and C32 Engines Engine Oil Cooler - Remove and Install
3516B Marine Auxiliary Engine Sensor Supply - Test
CG137-08 and CG137-12 Industrial Engines Spark Plug
3516B Marine Auxiliary Engine Secondary ECM - Test
3516B Marine Auxiliary Engine ECM/Personality Module - Test
C27 and C32 Tier 4 Engines Fan Adapter Fastener
2010/12/06 A Procedure Is Now Available to Adjust the Overload Protection on Certain Generator Sets. {4450, 4493}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System Relay Operation
C27 Petroleum Engine Engine Oil Pump - Disassemble
C15 Petroleum Generator Set Alarms and Shutoffs
C27 Petroleum Engine Engine Oil Pump - Assemble
C7.1 Industrial Engine Turbocharger - Install - Second Stage Turbocharger
Enabling Either of Two Programmable Monitoring Parameters Causes a Loss of Communication for the Electronic Control Module (ECM) on C175-16 Generator Set Engines{1901, 1920} Enabling Either of Two Programmable Monitoring Parameters Causes a Loss of Communication for the Electronic Control Module (ECM) on C175-16 Generator Set Engines{1901, 1920}
C27 and C32 Engines Flywheel Housing - Remove and Install
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Required Tools
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant Recovery
UPSB220 Uninterruptible Power Supply Display Messages
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Manifold Gauge Set (Refrigerant) - Install
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Refrigerant System - Evacuate
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950} Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.