Fuel Transfer Pump
Show/hide table
Illustration 1 | g02337197 |
Typical example |
(1) Tighten the allen head screws to the following torque. ... 9 N·m (80 lb in)
(2) Tighten the connection to the following torque. ... 21.5 N·m (16 lb ft)
Show/hide table
Illustration 2 | g02337198 |
Typical example |
(3) (4) Tighten the bolts to the following torque. ... 22 N·m (16 lb ft)
Caterpillar Information System:
3512C Oil Well Service Engines Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace - If Equipped
3512C Oil Well Service Engines Coolant Sample (Level 2) - Obtain
3512C Oil Well Service Engines Coolant Sample (Level 1) - Obtain
3512C Oil Well Service Engines Coolant Extender (ELC) - Add
3512C Oil Well Service Engines Coolant (ELC) - Change
3512C Oil Well Service Engines Coolant (DEAC) - Change
3512C Oil Well Service Engines Control Panel - Inspect/Test
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Overhaul Considerations
3512C Oil Well Service Engines Refill Capacities
2010/11/11 New Isolators for Engine Oil Pan for C6.6 Engines {1302}
C280 Marine Propulsion Engines Engine Cranks but Will Not Start
C4.4 Industrial Engine Fuel Manifold (Rail)
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317} Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
UPSB220 Uninterruptible Power Supply Safety Signs and Labels
UPSB220 Uninterruptible Power Supply General Hazard Information
C27 and C32 Generator Sets Control Panel - Inspect/Test
C27 and C32 Generator Sets Coolant (DEAC) - Change
C27 and C32 Generator Sets Coolant (ELC) - Change
C32 Generator Set Coolant Extender (ELC) - Add
CX31 On-Highway Transmission Transmission Planetary
C32 Generator Set Coolant Level - Check
C32 Generator Set Coolant Sample (Level 1) - Obtain
C32 Generator Set Coolant Sample (Level 2) - Obtain