Water Pump - Assemble
装配步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
C     | 1P-0510     | 冲头总成     | 1     |
D     | FT-3171     | 密封件冲头     | 1     |
- 将滤清器 (11) 和塞 (10) 安装到泵壳体 (2) 中。
Show/hide table
图 1 | g02209277 |
- 使用工具 (C) 和适当的压力机将密封件 (7) 安装到泵壳体 (2) 中,如图所示。
Show/hide table
图 2 | g02208893 |
Show/hide table
图 3 | g02208953 |
- 使用适当的压力机将轴 (6) 安装到轴承组件 (8) 中。
Show/hide table
图 4 | g02209237 |
- 将轴组件 (6) 安装到泵壳体 (2) 中。
Show/hide table
图 5 | g02209774 |
- 安装护圈 (5) 和螺栓 (4) 。
Show/hide table
图 6 | g02209894 |
- 加热齿轮 (3) 。 使用适当的压力机将轴组件 (6) 压入齿轮 (3) 中,直至齿轮 (3) 与轴承 (8) 平齐。
Show/hide table
图 7 | g02210093 |
- 使用工具 (D) 和适当的压力机将密封件组件 (9) 安装到泵壳体中。
注: 必须使用工具 (D) 以确保密封件组件 (9) 的正确安装。
Show/hide table
图 8 | g02210320 |
- 加热叶轮 (1) 。 使用适当的压力机安装叶轮 (1) ,直至叶轮 (1) 与轴 (6) 平齐。
Show/hide table
图 9 | g02210293 |
End By: 安装水泵。
Caterpillar Information System:
C27 and C32 Engines for Caterpillar Built Machines Water Pump - Disassemble
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Display Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators General Information
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Fuel System Primary Filter (Water Separator) Element - Replace
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators Safety Messages
C15 and C18 Industrial Engines Solenoid Valve (ARD Main Fuel) - Remove and Install
C15 and C18 Industrial Engines Soot Sensor - Remove and Install
C15 and C18 Industrial Engines Soot Antenna - Remove and Install - Clean Emissions Module
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package ARD Spark Plug - Replace
C9.3 Industrial Engine and CX31-P600-C9I Petroleum Power Train Package Belts - Inspect/Adjust/Replace
C15 and C18 Industrial Engines Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Industrial Engines Electronic Control (ARD Combustion Air) - Remove and Install
584 and 584HD Forwarders Fire Safety
C27 and C32 Industrial Engines Flywheel - Remove and Install
C7.1 Industrial Engine Flow Control Valve - Remove and Install
C7.1 Industrial Engine Fuel Temperature Sensor - Remove and Install
Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239} Incorrectly Assembled 0R-8320 Cylinder Pack As from the Factory for 3406C Truck Engines{1225, 1239}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600} NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
2010/12/16 A New Throttle is Used on some G3516B Engines {1265}
C27 Petroleum Generator Set Engines Shutdown - Test
C27 and C32 Industrial Engines Engine Oil Cooler - Remove and Install
C27 Petroleum Generator Set Engines Diagnostic Trouble Codes
Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120} Preventing Cracks and Leaks in the Composite Valve Covers on Some C9 Engines{1107, 1120}
C27 Petroleum Generator Set Engines Speed Control - Test